Leave a Message
Send us a message and we will get back to you within our regular business hours M-F 7am-6pm PST
Your Cart is Empty
The HPE ProLiant DL160 Gen8 is a dual-socket, high-performance, dense rack server with enhanced manageability and scalability suited for High Performance Computing (HPC) environments, web serving and other hyperscale environments.
HP ProLiant DL160 Gen8 Server High-performance computing with increased manageability in a dense 1U design. The HP ProLiant DL160 Gen8 is a dual-socket, highperformance, 1U rack server. With its enhanced manageability and scalability, it is perfectly suited for high-performance computing (HPC) environments, web serving, and other hyperscale environments.
HPE DL160 Gen8 8SFF
HPE DL160 Gen8 4LFF
HPE SmartMemory improves workload performance and power efficiency while preventing data loss and downtime with enhanced error handling. Support for RDIMMs and UDIMMs with up to 768GB max capacity .
HPE FlexibleLOM provides you additional choice of networking bandwidth and fabric so you can adapt to changing business needs.
HPE Smart Storage technology ensures fast communication with the drives, in addition to removing storage bottlenecks and turbo-charging data-intensive application performance to accelerate workloads.
HPE DL160 Gen8 rear
Processor (One of the following depending on the model)
Cache memory (One of the following depending on the model)
On system management chipset
HPE iLO (Firmware: HPE iLO 4)
Memory (One of the following depending on the model)
HPE NC361i Integrated Dual Port Gigabit Server Adapter
Storage controller (One of the following depending on the model)
Internal storage devices
Maximum internal storage
Industry standard compliance
Integrated Matrox G200 video standard
System fans (One of the following depending on the model)
Form factor (One of the following depending on the model)
Operating System (OS) and Virtualization Software support for ProLiant servers 1
NOTE: For more information, visit the Support Matrix for Certified and Supported ProLiant Servers for OS and Virtualization Software and the latest listing of software drivers available for the server. Click here to access Server operating system and virtualization solutions for HPE servers web site .
Dimensions (H x W x D) (with bezel)
Rated line voltage
Rated input current
Rated input frequency
50 to 60 Hz
Rated input power
BTU rating (maximum)
Rated steady-state power
Maximum peak power
System inlet temperature (operating)
10° to 35°C (50° to 95°F), at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or above 30°C (86°F).
System inlet temperature (non-operating)
-30° to +60°C (-22° to +140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative humidity (operating)
10% to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing
Relative humidity (non-operating)
5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing
30480 m (10,000 ft)
9144 m (30,000 ft)
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
HP iLO 4 On System Management
1920 x 1200 (16 b/p) DVR max resolution
HP ProLiant iLO 4 Management Controller Driver Package
16MB Flash; 256MB DDR 3 with ECC (112MB after ECC and video)
Embedded ARM processor core operating at 400 MHz
HP Dynamic Smart Array B120i Controller
Logical drives supported
Zero Memory, Up to 2 logical volumes (6 physical drives)
HP Ethernet 1Gb 2-port 361i Adapter
Data transfer method
PCI Express v 2.1, 5.0-GT/s and 2.5-GT/s bus speeds and supports for x1, x2, x4 links widths (Lanes)
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1