Your Cart is Empty
The secure HPE ProLiant DL180 Gen10 server delivers on scalability, performance, and reliability thus making it the ideal platform for businesses ready to run on-premises and hybrid cloud applications. These businesses need the right mix of compute and storage, enabling them to achieve their most important goals.
DL180 Gen10 12LFF
DL180 Gen10 8LFF
DL180 Gen10 8SFF
The flexible design provides choice of options and ability to scale. It is configured to meet the new standard of growing data center needs. The server supports Intel Xeon Scalable Processor series, up to eight cores (maximum 24) with 16 DDR4 2666 MHz (256 GB maximum).
Two PCIe 3.0 slots and HPE iLO 5, UEFI and legacy boot mode, along with the standard HPE Dynamic Smart Array S100i. You have a choice of HPE Flexible Smart Array or HPE Smart HBA controllers for performance or additional features.
500W multi-output, up to 94% efficiency (Titanium), Flexible Slot PS, Standard 3-3-3 warranty, HPE Secure Encryption.
DL180 Gen10 rear
Intel C622 chipset
On system management chipset
HPE Integrated Lights-Out (HPE iLO) 5 ASIC
One of the following depending on model
For details on the HPE Server memory options RAS feature, visit: Click here to view the Memory RAS technologies for HPE ProLiant/Synergy/Blade Gen10 servers with Intel Xeon Scalable processors for more infomration .
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet .
HPE Smart array S100i SR Gen10 SW RAID
Essential RAID controller
Performance RAID controller
HPE Smart Array P408i-a SR Gen10 controller
Internal storage devices
One of the following depending on model
Maximum internal storage
1 Rear - VGA Port (Standard)
2 x 1Gb ports shipping standard with optional media module, FlexibleLOM or stand up card
Management Network Port
Front iLO service port
Micro SD slot
1 Micro SD
Industry standard compliance
Graphics integrated video standard
HPE iLO 5 on system management memory
HPE Server Unified Extensible Firmware Interface (UEFI)/legacy ROM
UEFI is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with users server at boot time. HPE ProLiant Gen10 servers have a UEFI Class 2 implementation and support both UEFI mode (Default) and legacy BIOS mode.
UEFI boot mode only:
Boot support for option cards that only support a UEFI option ROM
OS and virtualization software support for ProLiant servers
Dimensions (H x W x D)
8.75 x 44.54 x 63.47 cm (3.44 x 17.54 x 24.99 in)
Minimum: 8 SFF/LFF chassis with 1x SFF/LFF HDD and 7 HDD blanks, 2x drive bay blanks, 1x processor including standard heatsink, 1x power supply (Plus blank), 1x smart array, 1x riser installed, cables for the above)
Rated line voltage
Maximum: For 500 W Power supply: 1979 BTU/hr (At 100 V ac), 1911 BTU/hr (At 200 V ac), 1965 BTU/hr (At 240 V ac) for china only
Power supply output
Rated Steady-State power
System inlet temperature
10° to 35° C (50° to 95° F)
Extended ambient operating support
5° to 10° C (41° to 50° F) and 35° to 40° C (95° to 104° F)
-30° to 60° C (-22° to 140° F). Maximum rate of change is 20°C/hr (36°F/hr)
Operating relative humidity
8% to 90% - Relative humidity, 28°C maximum wet bulb temperature, Non-Condensing
Non-Operating relative humidity
5 to 95% - Relative humidity, 38.7°C (101.7°F) maximum wet bulb temperature, Non-Condensing
3050 m (10,000 ft)
9144 m (30,000 ft)
Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). The listed sound levels apply to standard shipping configurations. Additional options may result in increased sound levels. Please have your HPE representative provide information from the HPE EMESC website for further technical details regarding the configurations listed below.
Emissions Classification (EMC)
To view the regulatory information for users product, view the safety and compliance information for server, storage, power, networking, and rack products, available at the Hewlett Packard Enterprise Support Center: Hewlett Packard Enterprise Support Center for Enterprise Safety and Compliance .