Please remove $0 item(s) from cart - or - Request for Quote

Cisco UCS C240 C-Series M4 2.5" SFF Rack Servers CTO

Brand:
Type:
CTO Servers
Condition:
ECS Refurbished & Tested
-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

READ ME

  • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
  • “Submit for Quote” items can be added to your cart and sent to us via the cart page
  • Click the blue bar to close/open a section from view after choosing your options

Select Chassis

Select Processor

E5-2600 v4 Series Processor Family CPU

The selection of 1 or 2 CPUs depends on the desired server functionality.

Select Security Bezel (Optional)

Select Riser Card 1 (Optional)

The selection of riser card 1 determines the number and type of PCIe cards and SATA boot drives supported in the riser

Select Riser Card 2 (Optional)

If no riser is selected, a riser blanking panel will be installed. You will not be able to install any PCIe cards without a riser selected

Select Memory

Select Memory Mode (Optional)

Select RAID Controller (Optional)

The default RAID configuration is embedded software RAID,
Read below for more detailed information about the RAID Controllers

Select HDD(s) (Optional)

All SED HDDs are FIPs 140-2 compliant
SED SSDs (10X endurance) are FIPS 140-2 compliant
SED SSDs (3X and 1X endurance) are not FIPS 140-2 compliant

Select SSD(s) (Optional)

All SED HDDs are FIPs 140-2 compliant
SED SSDs (10X endurance) are FIPS 140-2 compliant
SED SSDs (3X and 1X endurance) are not FIPS 140-2 compliant

Select Boot Drives (Optional)

Mounted inside the chassis
If you are configuring a 24-drive backplane system that uses SATA SSD boot drives, choose up to two identical boot drives

Select NVMe Drive (Optional)

If you choose one or two PCIe SSD drives, drive slots 1 and 2 at the front of the chassis are reserved for these drives
You must order an interposer board and cable kit if you order an NVMe SFF 2.5” drive. A single interposer board and cable kit supports up to two NVMe SFF 2.5” drives.

Select Interposer Board & Cable Kit (Optional)

You must order an interposer board and cable kit if you order an NVMe SFF 2.5” drive. A single interposer board and cable kit supports up to two NVMe SFF 2.5” drives.

Select PCIe Option Card (Optional)

If you choose an external drives controller (Cisco 9300-8e 12G SAS HBA), it will consume one PCIe slot.

Select Network Card Accessories (Optional)

Choose Up to Two Twinax Cables for Each Network Card Ordered
Choose Up to Two SFP+ Modules for Each Network Card Ordered

Select GPU & GPU Power Cables (Optional)

Select Power Supplies

The C240 M4 server requires at least one power supply.

Select Power Cables (Optional)

You can select a minimum of no power cords and a maximum of two. If you select the option R2XX-DMYMPWRCORD, no power cord is shipped with the server.

Select Rail Kit (Optional)

The reversible cable management arm mounts on either the right or left slide rails at the rear of the server and is used for cable management.

Select Cable Management Arm (CMA) (Optional)

If you plan to rackmount your UCS C240 M4 server, you must order a tool-less tool-less rail kit.

Select NIC Mode (Optional)

By default, the C240 M4 server NIC mode is configured to be Shared LOM Extended.

Select Trusted Platform Module (Optional)

Trusted Platform Module (TPM) is a computer chip (microcontroller) that can securely store artifacts used to authenticate the platform (server).

Select SD Card Module (Optional)

Install either one or two 64, or 32 GB SD cards
Do not mix SD card sizes

Select USB 3.0 Drive (Optional)

Select a Warranty

Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

The UCS C240 M4 small form factor (SFF) server is the newest 2-socket, 2U rack server from Cisco, designed for both performance and expandability over a wide range of storage-intensive infrastructure workloads from big data to collaboration.

The enterprise-class UCS C240 M4 SFF server extends the capabilities of Cisco’s Unified Computing System portfolio in a 2U form factor with the addition of the Intel® Xeon E5-2600 v3 and v4 series processor family that delivers the best combination of performance, flexibility, and efficiency gains. In addition, the UCS C240 M4 SFF server provides 24 DIMM slots, up to 6 PCI Express (PCIe) 3.0 slots, up to 24 front-loading drives plus two (optional) internal SATA boot drives for a total of 26 internal drives.

The C240 M4 server includes a modular LAN on motherboard (mLOM) slot for installation of a Cisco Virtual Interface Card (VIC) or third-party network interface card (NIC) without consuming a PCI slot in addition to 2 x 1 GbE embedded (on the motherboard) LOM ports. These features combine to provide outstanding levels of internal memory and storage expandability along with exceptional performance.

The Cisco UCS C240 M4 server can be used standalone, or as part of the Cisco Unified Computing System, which unifies computing, networking, management, virtualization, and storage access into a single integrated architecture enabling end-to-end server visibility, management, and control in both bare metal and virtualized environments.

 

Current Configuration

Select Chassis

Select Processor

Select Security Bezel (Optional)

Select Riser Card 1 (Optional)

Select Riser Card 2 (Optional)

Select Memory

Select Memory Mode (Optional)

Select RAID Controller (Optional)

Select HDD(s) (Optional)

Select SSD(s) (Optional)

Select Boot Drives (Optional)

Select NVMe Drive (Optional)

Select Interposer Board & Cable Kit (Optional)

Select PCIe Option Card (Optional)

Select Network Card Accessories (Optional)

Select GPU & GPU Power Cables (Optional)

Select Power Supplies

Select Power Cables (Optional)

Select Rail Kit (Optional)

Select Cable Management Arm (CMA) (Optional)

Select NIC Mode (Optional)

Select Trusted Platform Module (Optional)

Select SD Card Module (Optional)

Select USB 3.0 Drive (Optional)

Select a Warranty

*list also serves as quick links to each section

Welcome to the Request Express Quoting Form!

for: Cisco UCS C240 C-Series M4 2.5" SFF Rack Servers CTO


This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

Let's get started!
Simply fill out the form, and we'll take care of the rest.


Name *
Email *
Message *
Preferred Brand
Form Factor
Rack Unit of Height (#U)
Processor(s)
Memory
Total Amount of Memory
Total Amount of Usable Storage

Storage Type


RAID

List Networking Connection needed:
Rack Space Restrictions
Which OS do you plan on using:


Price as Configured: 0

Add to Cart

Error Submitting Cart. Please get in touch with us for support.

Please select all the mandatory items in the configuration list before submitting the cart.

One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

Product Specs

Base Standard Capabilities

Capability / FeatureDescription
ChassisTwo rack unit (2RU) chassis
CPUOne or two Intel Xeon E5-2600 v3 or v4 series processor family CPUs
ChipsetIntel® C610 series chipset
Memory24 slots for registered ECC DIMMs (RDIMMs) or load-reduced DIMMs (LRDIMMs)
Multi-bit Error ProtectionThis server supports multi-bit error protection.
Expansion slotsUp to six PCIe slots (on two riser cards)
  • Riser 1 (PCIe slots 1, 2, and 3), controlled by CPU 1
    • Option A: Two slots available. Slot 1 = full height, 3/4 length, x8, NCSI 1 . Slot 2 = full height, full length, x16, NCSI, GPU capable. NCSI is supported on only one slot at a time.
    • Option B: Three slots available. Slot 1 = full height, 3/4 length, x8. Slot 2 = full height, full length, x8, NCSI. Slot 3 = full height, full length, x8.
    • Option C: Two slots available. Slot 1 = full height, 3/4 length, x8, NCSI. Slot 2 = full height, full length, x16, NCSI. In addition, the riser contains two connectors for connecting up to two SATA boot drives.
  • Riser 2 (PCIe slots 4, 5, and 6), controlled by CPU 2. Three slots available. Slot 4 = full height, 3/4 length, x8, NCSI. Slot 5 = full height, full length, x16, NCSI, GPU capable. Slot 6 = full height, full length, x8. NCSI is supported on only one slot at a time.
  • Dedicated RAID controller slot
    • An internal slot is reserved for the Cisco 12G SAS Modular RAID controller.
PCIe Interposer BoardAn optional interposer board inside the chassis containing two mini-SAS HD connectors allows two front-mount NVMe SFF 2.5” drives to mount in drive bays 1 and 2 (only) and connect to the PCIe bus of CPU2.
VideoThe Cisco Integrated Management Controller (CIMC) provides video using the Matrox G200e video/graphics controller:
  • Integrated 2D graphics core with hardware acceleration
  • DDR2/3 memory interface supports up to 512 MB of addressable memory (8 MB is allocated by default to video memory)
  • Supports display resolutions up to 1920 x 1200 16bpp @ 60Hz
  • High-speed integrated 24-bit RAMDAC
  • Single lane PCI-Express host interface running at Gen 1 speed
Internal storage devicesDrives are installed into front-panel drive bays that provide hot-pluggable access.
  • Small Form Factor (SFF) drives. The server can hold up to:
    • 24 2.5 inch (63.5 mm) SAS/SATA hard drives (HDDs) or SAS/SATA solid state drives (SSDs) 2 with the 24-drive backplane (with expander) server configuration, plus two optional internal 2.5 inch SATA SSDs for booting an OS.
    • 6 2.5 inch (63.5 mm) SAS/SATA HDDs or SAS/SATA SSDs with the 16-drive backplane (with expander) server configuration
    • 8 2.5 inch (63.5 mm) SAS/SATA HDDs or SAS/SATA SSDs with the 8-drive backplane server (no expander) configuration.
    • NVMe SFF 2.5” drives These drives can placed in front drive bays 1 and 2 only.
  • The server also contains one internal USB 3.0 port on the motherboard that you can use with an optional 16 GB USB thumb drive for additional storage
  • UCS Storage Accelerators are also available. These PCIe plug-in flash storage cards provide independent high-speed storage.
Cisco Flexible Flash drivesThe server supports up to two internal 32 GB or two internal 64 GB Cisco Flexible Flash drives (SD cards).
The second SD card is blank and can be used to mirror the first SD card. It can be used to protect the Hypervisor Partition with RAID1.
Interfaces
  • Rear panel
    • One DB15 VGA connector
    • One RJ45 serial port connector
    • Two USB 3.0 port connectors
    • One RJ-45 10/100/1000 Ethernet management port, using Cisco Integrated Management Controller (CIMC) firmware
    • Two Intel i350 embedded (on the motherboard) GbE LOM ports
    • One flexible modular LAN on motherboard (mLOM) slot that can accommodate various interface cards
  • Various PCIe card ports (dependent on which cards are installed)
    • Virtual Interface Card (VIC) ports
    • Converged Network Adapter (CNA) ports
    • Network Interface Card (NIC) ports
    • Host Bus Adapter (HBA) ports
  • Front panel
    • One KVM console connector (supplies two USB 2.0 connectors, one VGA DB15 video connector, and one serial port (RS232) RJ45 connector)
Power subsystemUp to two of the following hot-swappable power supplies:
  • 650 W (AC)
  • 1200 W (AC)
  • 1400 W (AC)
One power supply is mandatory; one more can be added for 1 + 1 redundancy.
Storage controllerEmbedded Software RAID (6 Gbps)
  • Embedded SATA-only RAID controller, supporting up to 8 SATA-only drives (RAID 0, 1), or
  • Embedded Software RAID 5 key upgrade, supporting up to 8 SATA-only drives (RAID 0, 1, 10, 5)
Note that embedded RAID options can be supported only with the version of the C240 M4 SFF server that has been configured with an 8-drive backplane.
Cisco 12G SAS Modular RAID controller card with internal SAS connectivity.
  • Supports up to 24 internal drives
  • Plugs into a dedicated RAID controller slot

Can be purchased alone, or along with an onboard Flash-Backed Write Cache (FBWC) upgrade option, as shown in the table below
Notes
RAID Card VersionSupported RAID LevelsOnboard FBWC
UCSC-MRAID12G [1]JBOD, 0, 1, 10None
UCSC-MRAID12G-1GB [2]JBOD, 0, 1, 10, 5, 6, 50, 601 GB
UCSC-MRAID12G-2GB [2]JBOD, 0, 1, 10, 5, 6, 50, 604 GB
1. Base RAID controller card (RAID 0, 1, 10 only)
2. FBWC option for base RAID controller card (adding the FBWC option extends the RAID levels)

All versions of the UCSC-MRAID12G RAID controller support up to 24 internal SAS drives on the 24-drive backplane version of the server, up to 16 drives on the 16-drive backplane version, or up to 8 drives on the 8-drive backplane version.
WoLThe 1-Gb Base-T Ethernet LAN ports support the wake-on-LAN (WoL) standard.
Front PanelA front panel controller provides status indications and control buttons
ACPIThis server supports the advanced configuration and power interface (ACPI) 4.0 standard.
FansChassis: Six hot-swappable fans for front-to-rear cooling
Boot drivesUp to two optional SATA drives can be installed internal to the chassis on riser 1. The two SATA boot drives are supported only on the 24-drive backplane chassis version and are managed in AHCI mode, using OS-based software RAID.
Storage controllerCisco 12 Gbps Modular SAS HBA with internal SAS connectivity
  • Supports up to 24 internal drives
  • Is compatible with all backplane versions (8-, 16-, and 24-drive backplanes)
  • Plugs into a dedicated PCIe slot at the rear of the server (slot 1 of riser 1)
  • Supports JBOD only, not RAID, as shown in the below table.
HBA Card VersionSupported RAID Levels
UCSC-SAS12GHBAJBOD only

Cisco 9300-8E 12G SAS HBA with external SAS connectivity
  • Provides 8 external SAS ports
  • Plugs into a PCIe slot at the rear of the server
  • No FBWC (cache) or cache power backup
  • SAS 3.0 compliant
Embedded NICTwo embedded (on the motherboard) Intel i350 GbE ports, supporting the following:
  • Pre-Execution Boot (PXE boot)
  • iSCSI boot
  • Checksum and segmentation offload
  • NIC teaming
Modular LAN on Motherboard (mLOM) slotThe mLOM slot can flexibly accommodate the following cards:
  • Cisco Virtual Interface Cards (VIC)
  • Quad Port Intel i350 1GbE RJ45 Network Interface Card (NIC)
Integrated management processorBaseboard Management Controller (BMC) running Cisco Integrated Management Controller (CIMC) firmware.
Depending on your CIMC settings, the CIMC can be accessed through the 1-GbE dedicated management port, the 1-GbE LOM ports, or a Cisco virtual interface card (VIC).
Footer
The four Intel i350 ports are provided on an optional card  that plugs into the mLOM slot, and are separate from the two embedded (on the motherboard) LAN ports
NCSI = Network Communications Services Interface protocol. An NCSI slot is powered even when the server is in standby power mode.
The drives are available as both self-encrypted drives (SED) and non self-encrypted drives.

Available Chassis

Product ID (PID) PID Description
UCSC-C240-M4SXUCS C240 M4 SFF, no CPU, memory, HDD, SSD, PCIe cards, tool-less rail kit, or power supply, with 24-drive backplane with SAS expander

UCSC-C240-M4S2UCS C240 M4 SFF, no CPU, memory, HDD, SSD, PCIe cards, tool-less rail kit, or power supply, with 16-drive backplane with SAS expander
UCSC-C240-M4SUCS C240 M4 SFF, no CPU, memory, HDD, SSD, PCIe cards, tool-less rail kit, or power supply, with 8-drive backplane with no SAS expander
Footnote:
[1]Embedded Software RAID can only be used with the 8-drive backplane version of the server.
[2]The Cisco 12G SAS Modular RAID controller and Cisco 12 Gbps Modular SAS HBA can be used with any backplane version.
[3]Does not include power supply, CPU, memory, hard disk drives (HDDs), solid-state drives (SSDs), boot drives, SD cards, riser 1, riser 2, tool-less rail kit, or PCIe cards.

Available Riser Cards

Product ID (PID) PID Description
Riser 1 Options
UCSC-PCI-1A-240M4 C240 M4 PCIe Riser 1 Assy (option A) (2 PCIe slots: 1x8 and 1x16 GPU capable)
UCSC-PCI-1B-240M4 C240 M4 PCIe Riser 1 Assy (option B) (3 PCIe slots: 3x8)
UCSC-PCI-1C-240M4 C240 M4 PCIe Riser 1 Assy (option C) (2 PCIe slots: 1x8 and 1x16 plus connectors for 2 SATA boot drives)
Riser 2 Options
UCSC-PCI-2-C240M4PCIe Riser Board (Riser 2) for C240 M4 (3 slots: 2x8 and 1x16)
Footnote:
[1]Riser card 1 is the one on the left when viewed from the back of the server and riser card 2 is on the right.
[2]The selection of riser card 1 determines the number and type of PCIe cards and SATA boot drives supported in the riser.
[3]If no riser is selected, a riser blanking panel will be installed. You will not be able to install any PCIe cards without a riser selected

Available CPU's

Product ID (PID) Intel Number Clock Freq (GHz) Power (W) Cache Size (MB) Cores QPI Highest DDR4 DIMM Clock Support (MHz) [1]
UCS-CPU-E52699AE E5-2699A v4 2.4 145 55 22 9.6 GT/s 2400
UCS-CPU-E52699E E5-2699 v4 2.2 145 55 22 9.6 GT/s 2400
UCS-CPU-E52698E E5-2698 v4 2.2 135 50 20 9.6 GT/s 2400
UCS-CPU-E52697AE E5-2697A v4 2.6 145 40 16 9.6 GT/s 2400
UCS-CPU-E52697E E5-2697 v4 2.3 145 45 18 9.6 GT/s 2400
UCS-CPU-E52695E E5-2695 v4 2.1 120 45 18 9.6 GT/s 2400
UCS-CPU-E52690E E5-2690 v4 2.6 135 35 14 9.6 GT/s 2400
UCS-CPU-E52683E E5-2683 v4 2.1 120 40 16 9.6 GT/s 2400
UCS-CPU-E52680E E5-2680 v4 2.4 120 35 14 9.6 GT/s 2400
UCS-CPU-E52667E E5-2667 v4 3.2 135 25 8 9.6 GT/s 2400
UCS-CPU-E52660E E5-2660 v4 2 105 35 14 9.6 GT/s 2400
UCS-CPU-E52650E E5-2650 v4 2.2 105 30 12 9.6 GT/s 2400
UCS-CPU-E52650LE E5-2650L v4 1.7 65 35 14 9.6 GT/s 2400
UCS-CPU-E52643E E5-2643 v4 3.4 135 20 6 9.6 GT/s 2400
UCS-CPU-E52640E E5-2640 v4 2.4 90 25 10 8.0 GT/s 2133
UCS-CPU-E52637E E5-2637 v4 3.5 135 15 4 9.6 GT/s 2400
UCS-CPU-E52630E E5-2630 v4 2.2 85 25 10 8.0 GT/s 2133
UCS-CPU-E52630LE E5-2630L v4 1.8 55 25 10 8.0 GT/s 2133
UCS-CPU-E52623E E5-2623 v4 2.6 85 10 4 8.0 GT/s 2133
UCS-CPU-E52620E E5-2620 v4 2.1 85 20 8 8.0 GT/s 2133
UCS-CPU-E52609E E5-2609 v4 1.7 85 20 8 6.4 GT/s 1866
UCS-CPU-E52658E E5-2658 v4 2.3 105 35 14 9.6 GT/s 2400
UCS-CPU-E52680D E5-2680 v3 2.5 120 30 12 8.0 GT/s 2133
UCS-CPU-E52640D E5-2640 v3 2.6 90 20 8 6.4 GT/s 1866
UCS-CPU-E52620D E5-2620 v3 2.4 85 15 6 6.4 GT/s 1866
UCS-CPU-E52609D E5-2609 v3 1.9 85 15 6 - 1600
UCS-CPU-E52658D E5-2658 v3 2.2 105 30 12 8.0 GT/s 2133
Footnote:
[1]If higher or lower speed DIMMs are selected than what is shown in the table for a given CPU, the DIMMs will be clocked at the lowest common denominator of CPU clock and DIMM clock
[1]You can select either one processor or two identical processors.
[2]For optimal performance, select DIMMs with the highest clock speed for a given processor

Available DIMMs and Memory Mirroring

Product ID (PID) PID Description Voltage Ranks /DIMM
2400-MHz DIMM Options
UCS-ML-1X644RV-A 64GB DDR4-2400-MHz LRDIMM/PC4-19200/quad rank/x4 1.2 V 4
UCS-MR-1X322RV-A 32GB DDR4-2400-MHz RDIMM/PC4-19200/dual rank/x4 1.2 V 2
UCS-MR-1X161RV-A 16GB DDR4-2400-MHz RDIMM/PC4-19200/single rank/x4 1.2 V 1
UCS-MR-1X081RV-A 8 GB DDR4-2400-MHz RDIMM/PC4-19200/single rank/x4 1.2 V 1
UCS-ML-1X324RV-A 32GB DDR4-2400-MHz LRDIMM/PC4-19200/quad rank/x4 1.2 V 4
UCS-MR-1X162RV-A 16GB DDR4-2400-MHz RDIMM/PC4-19200/dual rank/x4 1.2 V 2
Memory Mirroring Option
N01-MMIRROR Memory mirroring option - -
Footnote:
[1-CPU]Without memory mirroring: Select from 1 to 12 DIMMs.
[2-CPU]Without memory mirroring: Select from 1 to 12 DIMMs.
[1]System performance is optimized when the DIMM type and quantity are equal for both CPUs, and when all channels are filled equally across the CPUs in the server.
[2]System speed is dependent on how many DIMMs are populated per channel and the CPU DIMM speed support.
[3]When you mix 2400 MHz RDIMMs of different sizes (for example, 4x32GB + 4x16GB), the memory speed clocks one step down to 2133 MHz.
[4]Do not mix RDIMMs with LRDIMMs
[5]Do not mix 64GB DDR4-2133-MHz TSV-RDIMMs with any other DIMMs
[6]Single-rank DIMMs can be mixed with dual-rank DIMMs in the same channel
[7]Do not mix quad-rank DIMMs with single- or dual-rank DIMMs in the same channel
[8]DIMMs for CPU 1 and CPU 2 (when populated) must always be configured identically.
[9]When using mirroring, DIMMs must be installed in identical pairs across paired DDR4 buses. That is, mirrored pairs in channels A and B must be identical and pairs in channels C and D must be identical. However, the DIMMs used in channels A and B can be different from those in channels C and D.
[10]Memory mirroring reduces the amount of available memory by 50% (quantity of DIMMs must be even for mirroring).
[11]Non-ECC DIMMs are not supported.
[12]Cisco memory from previous generation servers (DDR3) is not compatible with this server

Available RAID Controllers

Product ID (PID) PID Description
Embedded Software RAID 5 Key Upgrade
UCSC-SWRAID5Embedded Software RAID 5 key upgrade, consisting of a storage controller unit (SCU) module that plugs into a 2-pin header on the motherboard, supporting up to eight internal SATA only HDDs. See Embedded SATA RAID: Two SATA Controllers, page 95. This module upgrades the embedded software RAID controller option to add RAID 5. This option supports RAID 0, 1, 10, 5 and operates at 6 Gbps. Operating systems supported are Windows and Linux only (no VMware support). On M4 platforms, SWRAID is not supported for RHEL 7.3 and above.
VMware ESX/ESXi or any other virtualized environments (such as Hyper-V, Xen, or KVM) are not supported for use with the embedded software RAID controller.
Controllers for Internal Drives
-Note that if the following Cisco 12G SAS Modular RAID controller or Cisco 12Gbps Modular SAS HBA controller is selected, it is factory-installed in the dedicated internal slot.
UCSC-MRAID12GCisco 12G SAS Modular RAID Controller
  • Supports up to 24 internal SAS HDDs and SAS/SATA SSDs (limited to 4 drives in this server)
  • Supports JBOD, RAID 0, 1, 10 (with no FBWC option chosen) and has the ability to also support RAID 5, 6 if a Flash-Backed Write cache upgrade is chosen (shown below in this table)
  • SED drives are compatible with only with the combination of a UCSC-MRAID12G RAID controller along with one of the flash-back write cache modules (UCSC-MRAID12G-1GB, UCSC-MRAID12G-2GB, or UCSC-MRAID12G-4GB).
  • For all self-encrypting drives (SED), standalone Management (CIMC) is supported for configuring and managing local keys (UCSM is not supported). For now, SED drives are managed with local key management only. In the future, third-party key management will be supported.
UCSC-SAS12GHBACisco 12 Gbps Modular SAS HBA
  • Supports up to 24 internal SAS HDDs and SAS/SATA SSDs (limited to 4 drives in this server)
  • Supports JBOD mode only (no RAID functionality. Ideal for SDS (Software Defined Storage) applications. It is also ideal for environments demanding the highest IOPs (for external SSD attach), where a RAID controller can be an I/O bottleneck.
UCSC-PSAS12GHBA [1]Same functionality as UCSC-SAS12GHBA, but vendor is Microsemi
Flash-Backed Write Cache (FBWC) Upgrade Options for Cisco 12G SAS Modular RAID controller
UCSC-MRAID12G-1GB1 GB FBWC, which includes a 1 GB MB memory plus a SuperCap for write cache backup. Supports JBOD, RAID 0, 1, 10, 5, 6, 50, and 60.
UCSC-MRAID12G-2GB2 GB FBWC, which includes a 2 GB MB memory plus a SuperCap for write cache backup. Supports JBOD, RAID 0, 1, 10, 5, 6, 50, and 60.
UCSC-MRAID12G-4GB4 GB FBWC, which includes a 4 GB MB memory plus a SuperCap for write cache backup. Supports JBOD, RAID 0, 1, 10, 5, 6, 50, and 60.
SAS HBA for External JBOD Attach
Two SFF8644 mini-SAS HD connectors on this card are accessible at the rear of the chassis.
UCSC-SAS9300-8ECisco 9300-8e 12G SAS HBA for external JBOD attach
Supports external JBOD using X8 wide SAS ports.
RAID Configuration Options (not available for Cisco 12 Gbps Modular SAS HBA or embedded software RAID)
R2XX-SRAID0Enable Single Disk Raid 0 Setting
R2XX-RAID0Factory preconfigured RAID striping option Enable RAID 0 Setting. Requires a minimum of one hard drive.
R2XX-RAID1Factory preconfigured RAID mirroring option Enable RAID 1 Setting. Requires exactly two drives with the same size, speed, capacity.
R2XX-RAID5Factory preconfigured RAID option Enable RAID 5 Setting. Requires a minimum of three drives of the same size, speed, capacity.
R2XX-RAID6Factory preconfigured RAID option Enable RAID 6 Setting. Requires a minimum of four drives of the same size, speed, capacity.
Footnote:
[1]You can choose either the default embedded software RAID or the embedded software RAID 5 key upgrade.
The default RAID configuration is embedded software RAID, which supports SATA HDDs (RAID 0, 1, 10).
The embedded software RAID 5 key upgrade supports RAID 0, 1, 5, 10.
NotesThe embedded software RAID in the Intel chipset hub is split into two, SATA and sSATA (secondary SATA). They are seen as separate software RAID controllers and are configurable separately.
[2]If you want to boot from a device other than the Cisco 12G SAS Modular RAID controller or Cisco 12 Gbps Modular SAS HBA, you can leave the card installed. Just disable the OPROM for its slot, and the system will boot even with the card installed.
[3]External drive PCIe controller card is the Cisco 12G 9300-8e 12G SAS HBA and can be installed simultaneously with the Cisco 12G SAS Modular RAID controller card or Cisco 12 Gbps Modular SAS HBA.
[Caveats]-
[1]A maximum of two Cisco 9300-8e 12G SAS HBAs can be installed in any slot (depending on the number of CPUs installed). The system can also support combinations of one Cisco 9300-8e 12G SAS HBA and a Storage Accelerator card along with either a Cisco 12G SAS Modular RAID Controller, or a Cisco 12 Gbps Modular SAS HBA.
[2]For the Cisco 12G SAS Modular RAID controller you can choose an optional RAID configuration (up to RAID 0, 1, 10, 5, 6, 50, 60 if optional FBWC option is chosen), which is preconfigured at the factory. The RAID level you choose must be an available RAID choice for the controller selected. RAID levels 50 and 60 are supported, although they are not available as configuration options. It can also be combined with AHCI support for internal SSDs (SATA Boot Drives) in 24-drive systems (only) and cannot be mixed with Embedded RAID.
[3]A system supports up to 8 SATA-only drives through the embedded software RAID controller if no Cisco 12G SAS Modular RAID controller is chosen.
[Approved Configurations]-
[-]The C240 M4 SFF server can be ordered as a UCSC-C240-M4SX (24-drive backplane with SAS expander), a UCSC-C240-M4S2 (16-drive backplane with SAS expander), or UCSC-C240-M4S (8-drive backplane with no SAS expander).
[1]The embedded software RAID (default) supports up to 8 internal SATA HDDs with RAID 0, 1, 10 support.
[2]The embedded software RAID 5 upgrade key option supports up to 8 internal SATA HDDs with RAID 0, 1, 10, 5 support.
[3]The Cisco 12G SAS Modular RAID controller upgrade option supports up to 24 internal drives with up to RAID 0, 1, 10, 5, 6, 50, 60 support (with FBWC option chosen).
[4]The Cisco 12 Gbps Modular SAS HBA supports up to 24 internal drives with JBOD support.
[5]The Cisco 9300-8e 12G SAS HBA supports up to 8 external SAS ports with JBOD support.
[Cisco 12G SAS Modular RAID Controller]-
[1]You can choose the Cisco 12G SAS RAID controller, which plugs into a dedicated RAID controller card slot. This RAID controller supports RAID 0, 1, 10 (without the FBWC option) and supports RAID 0, 1, 10, 5, 6, 50, 60 (with the FBWC option)

The number of RAID groups (virtual drives) supported per RAID controller is as follows:
  • Embedded RAID = 8
  • Cisco 12G SAS Modular RAID controller = 64
[2]This controller can be ordered with several modular flash-backed write cache (FBWC) options: 1 GB, 2 GB, or 4 GB. If the controller has a FBWC and you are using a RAID configuration that uses striping (RAID 0, 10, 50, or 60), then the full list of stripe sizes is available (8, 16, 32, 64, 128, 256, 512, or 1024 KB). If the controller does not have a FBWC, then the only stripe size available is 64 KB.
[SAS HBA (internal HDD/SSD/JBOD support)]-
[1]Instead of a RAID controller, you can choose a SAS HBA for internal JBOD drive connectivity (non-RAID):
  • Cisco 12 Gbps Modular SAS HBA, which plugs into a dedicated RAID controller slot.
[1]In addition to a RAID controller or JBOD controller for internal drives, you can choose the following SAS HBA for external JBOD drive connectivity (non-RAID):
Cisco 9300-8e 12G SAS HBA (provides 8 SAS ports for external JBOD connectivity).
[Select Controller Options]-
[1]Select as follows (these choices are dependent on the backplane used (24-drive, 16-drive, or 8-drive backplane)):
[2]For a 24-drive backplane system, select one of the following:
  • Cisco 12G SAS Modular RAID controller
  • Cisco 9300-8E 12G SAS HBA option (JBOD support only for external drives)
  • Mixed controllers:
    • ne Cisco 12G SAS Modular RAID controller or one Cisco 12 Gbps Modular SAS HBA
    • One or two Cisco 9300-8E 12G SAS HBAs (JBOD support only for external drives)
  • Dual HBAs
    • Two Cisco 9300-8E 12G SAS HBAs (JBOD support only for external drives) from
  • Select an appropriate optional RAID configuration listed Above (note that the Cisco 12 Gbps Modular SAS HBA supports JBOD only and is not a RAID controller).
[3]For a 16-drive backplane system, select one of the following:
  • Cisco 12G SAS Modular RAID controller or the Cisco 12 Gbps Modular SAS HBA
  • Cisco 9300-8E 12G SAS HBA upgrade option
  • Mixed controllers:
    • One Cisco 12G SAS Modular RAID controller or the Cisco 12 Gbps Modular SAS HBA
    • One or two Cisco 9300-8E 12G SAS HBAs (JBOD support only for external drives)
  • Dual HBAs
    • Two Cisco 9300-8E 12G SAS HBAs (JBOD support only for external drives)
[4]For an 8-drive backplane system, select one of the following:
  • Embedded software RAID (this is the default if no other selection is made)
  • Embedded software RAID 5 key upgrade option for internal drives
  • Cisco 12G SAS modular RAID controller or the Cisco 12 Gbps Modular SAS HBA
  • Cisco 9300-8E 12G SAS HBA upgrade option
  • Mixed controllers:
    • One Cisco 12G SAS modular RAID controller or the Cisco 12 Gbps Modular SAS HBA
    • One or two Cisco 9300-8E 12G SAS HBAs for external SAS JBOD/enclosure connectivity support
  • Dual HBAs:
    • Two Cisco 9300-8E 12G SAS HBAs (JBOD support only for external drives)

Available 2.5" SFF Hot-pluggable Drives

Product ID (PID) PID Description Drive Type Capacity
HDDs (15K RPM)
UCS-HD900G15K12G 900 GB 12G SAS 15K RPM SFF HDD SAS 900 GB
UCS-HD600G15K12G 600 GB 12G SAS 15K RPM SFF HDD SAS 600 GB
UCS-HD450G15K12G 450 GB 12G SAS 15K RPM SFF HDD SAS 450 GB
UCS-HD300G15K12G 300 GB 12G SAS 15K RPM SFF HDD SAS 300 GB
HDDs (10K RPM)
UCS-HD18TB10KS4K1 1.8 TB 12 Gbps SAS 10K RPM SFF HDD (4K Sector Format) SAS 1.8 TB
UCS-HD12TB10K12G 1.2 TB 12G SAS 10K RPM SFF HDD SAS 1.2 TB
UCS-HD900G10K12G 900 GB 12G SAS 10K RPM SFF HDD SAS 900 GB
UCS-HD600G10K12G 600 GB 12G SAS 10K RPM SFF HDD SAS 600 GB
UCS-HD300G10K12G 300 GB 12G SAS 10K RPM SFF HDD SAS 300 GB
HDDs (7.2K RPM)
UCS-HD2T7K12G 2 TB 12G SAS 7.2K RPM SFF HDD SAS 2 TB
UCS-HD1T7K12G 1 TB 12G SAS 7.2K RPM SFF HDD SAS 1 TB
UCS-HD1T7K6GA 1 TB 6G SATA 7.2K RPM SFF HDD SATA 1 TB
SSDs
Enterprise Performance SSDs (High endurance, supports up to 10X or 3X DWPD (drive writes per day)) [2]
UCS-SD16TB12S4-EP 1.6 TB 2.5 inch Enterprise Performance 12G SAS SSD (10X DWPD) (Sandisk Lightning Ascend) SAS 1.6 TB
UCS-SD400G12S4-EP 400 GB 2.5 inch Enterprise Performance 12G SAS SSD (10X DWPD) (Sandisk Lightning Ascend) SAS 400 GB
UCS-SD800G12S4-EP 800 GB 2.5 inch Enterprise Performance 12G SAS SSD (10X DWPD) (Samsung 1635)) SAS 800 GB
UCS-SD16TSASS3-EP 1.6TB 2.5 inch Enterprise performance 12G SAS SSD(3X DWPD) SAS 1.6 TB
UCS-SD800GSAS3-EP 800GB 2.5 inch Enterprise performance 12G SAS SSD(3X DWPD SAS 800 GB
UCS-SD32TSASS3-EP 3.2TB 2.5 inch Enterprise performance 12G SAS SSD(3X DWPD) SAS 3.2 TB
UCS-SD400GSAS3-EP 400GB 2.5 inch Enterprise performance 12G SAS SSD(3X DWPD) SAS 400 GB
UCS-SD480GIS3-EP 480GB 2.5in Enterprise performance 6G SATA SSD(3X endurance) SATA 400 GB
UCS-SD960GIS3-EP 960GB 2.5in Enterprise performance 6G SATA SSD(3X endurance) SATA 960 GB
UCS-SD19TIS3-EP 1.9TB 2.5in Enterprise performance 6G SATA SSD(3X endurance) SATA 1.9 TB
Enterprise Value SSDs (Low endurance, supports up to 1X DWPD (drive writes per day)) [3]
UCS-SD38TBKS4-EV 3.8 TB 2.5 inch Enterprise Value 6G SATA SSD (Samsung PM863) SATA 3.8 TB
UCS-SD19TBKSS-EV 1.9 TB 2.5 inch Enterprise Value 6G SATA SSD (Samsung PM863) SATA 1.9 TB
UCS-SD16TBKS4-EV 1.6 TB 2.5 inch Enterprise Value 6G SATA SSD (Intel 3510) SATA 1.6 TB
UCS-SD960GIKS4-EV 960GB 2.5 inch Enterprise Value 6G SATA SSD SATA 900 GB
UCS-SD480GBKSS-EV 480 GB 2.5 in Enterprise Value 6G SATA SSD (Samsung PM863) SATA 480 GB
UCS-SD480GBKS4-EV 480 GB 2.5 inch Enterprise Value 6G SATA SSD (Intel 3510) SATA 480 GB
UCS-SD120GBKS4-EV 120 GB 2.5 inch Enterprise Value 6G SATA SSD (Intel 3510) SATA 120 GB
UCS-SD960GBKS4-EV 960 GB 2.5 inch Enterprise Value 6G SATA SSD (Samsung PM863) SATA 960 GB
UCS-SD240GBKS4-EV 240 GB 2.5 inch Enterprise Value 6G SATA SSD (Samsung PM863) SATA 240 GB
UCS-SD120GBMS4-EV 120 GB 2.5 inch Enterprise Value 6G SATA SSD (Micron 5100 MAX) SATA 120 GB
UCS-SD240GBMS4-EV 240 GB 2.5 inch Enterprise Value 6G SATA SSD (Micron 5100 PRO) SATA 240 GB
UCS-SD480GBMS4-EV 480 GB 2.5 inch Enterprise Value 6G SATA SSD (Micron 5100 PRO) SATA 480 GB
UCS-SD960GBMS4-EV 960 GB 2.5 inch Enterprise Value 6G SATA SSD (Micron 5100 PRO) SATA 960 GB
UCS-SD16TBMS4-EV 1.6 TB 2.5 inch Enterprise Value 6G SATA SSD (Micron 5100 MAX) SATA 1.6 TB
UCS-SD19TBMS4-EV 1.9 TB 2.5 inch Enterprise Value 6G SATA SSD Micron 5100 ECO) SATA 1.9 TB
UCS-SD38TBMS4-EV 3.8 TB 2.5 inch Enterprise Value 6G SATA SSD (Micron 5100 ECO) SATA 3.8 TB
UCS-SD76TBMS4-EV 7.6 TB 2.5 inch Enterprise Value 6G SATA SSD (Micron 5100 ECO) SATA 7.6 TB
UCS-SD480GSAS-EV 480 GB 2.5 inch Enterprise Value 12G SAS SSD (Toshiba PX05) SAS 480 GB
UCS-SD480GBIS6-EV 480GB 2.5 inch Enterprise Value 6G SATA SSD SATA 480 GB
UCS-SD960GBIS6-EV 960GB 2.5 inch Enterprise Value 6G SATA SSD SATA 960 GB
UCS-SD38TBIS6-EV 3.8TB 2.5 inch Enterprise Value 6G SATA SSD SATA 3.8 TB
UCS-SD38TSAS-EV 3.8TB 2.5 inch Enterprise Value 12G SAS SSD SAS 3.8 TB
UCS-SD19TSAS-EV 1.9TB 2.5 inch Enterprise Value 12G SAS SSD SAS 1.9 TB
UCS-SD960GSAS-EV 960GB 2.5 inch Enterprise Value 12G SAS SSD SAS 960 GB
Boot Drives
UCS-SD16TBKS4-EB 1.6 TB 2.5 inch Enterprise Value 6G SATA SSD (boot) SATA 1.6 TB
UCS-SD480GBKS4-EB 480 GB 2.5 inch Enterprise Value 6G SATA SSD (boot) SATA 480 GB
UCS-SD240GBKS4-EB 240 GB 2.5 inch Enterprise Value 6G SATA SSD (boot) SATA 240 GB
UCS-SD120GBKS4-EB 120 GB 2.5 inch Enterprise Value 6G SATA SSD (boot) SATA 120 GB
The available plug-in PCIe SSD drives and kits below
NVMe SFF 2.5” drives
UCSC-NVMEM4-H800 Cisco 2.5in U.2 800GB HGST SN200 NVMe. High Endurance SSD NVMe SSD 800 GB
UCSC-NVMEM4-H1600 Cisco 2.5in U.2 1.6TB HGST SN200 NVMe. High Endurance SSD NVMe SSD 1.6 TB
PCIE SSD Interposer board + cable kit
UCSC-IPSSD-240M4B C240 M4 PCIE SSD Interposer board + cable kit (24 drive configuration)2 - -
UCSC-IP-SSD-240M4 C240 M4 PCIE SSD Interposer board + cable kit (8 or 16 drive configurations)2 - -
Footnote:
[Notes]-
[1]UCS Rack Servers require minimum firmware version 2.0(4) to support 4K sector size drives.
[2]If you choose one or two PCIe SSD drives, drive slots 1 and 2 at the front of the chassis are reserved for these drives
[3]You must order an interposer board and cable kit if you order an NVMe SFF 2.5” drive. A single interposer board and cable kit supports up to two NVMe SFF 2.5” drives.
[Approved Configurations]-
[1]For systems with an 8-drive backplane:
  • The embedded software RAID default supports up to 8 internal SATA HDDs with RAID 0, 1, 10 support.
  • The embedded software RAID 5 upgrade key option supports up to 8 internal SATA HDDs with RAID 0, 1, 10, 5 support.
[2]For systems with a 16-drive backplane:
    The Cisco 12G SAS Modular RAID controller upgrade option supports up to 16 internal SAS HDDs and SAS/SATA SSDs.
    • The Cisco 12G SAS Modular RAID controller with no FBWC option (supports JBOD, RAID 0, 1, 10)
    • The Cisco 12G SAS Modular RAID controller with FBWC option (supports JBOD, RAID 0, 1, 10, 5, 6, 50, and 60)
[3]For systems with a 24-drive backplane:
  • The Cisco 12G SAS Modular RAID controller upgrade option supports up to 24 internal SAS HDDs and SAS/SATA SSDs.
  • The Cisco 12 Gbps Modular SAS HBA upgrade option supports up to 24 internal SAS HDDs and SAS/SATA SSDs
[4]NOTES: If you selected a Cisco 12G SAS Modular RAID controller for internal HDDs/SSDs, you have the following options:
  • Cisco 12G SAS Modular RAID controller with no FBWC option (supports JBOD, RAID 0, 1, 10)
  • Cisco 12G SAS Modular RAID controller with FBWC option (supports JBOD, and RAID up to 0, 1, 10, 5, 6, 50, and 60)
  • For either option, select up to 8, 16, or 24 SAS HDDs or SAS/SATA SSDs,
[5]Systems Using Boot Drives

If you are configuring a 24-drive backplane system that uses SATA SSD boot drives, choose up to two identical boot drives
[6]Systems Using Plug-in NVMe SFF 2.5” drives
Systems using NVMe SFF 2.5” drives are controlled through the PCIe bus. If you choose one or two NVMe SFF 2.5” drives, they must be plugged into only drive slots 1 and 2 in the front of the chassis. Additionally, any system implementing NVMe SFF 2.5” drives must be ordered with two CPUs.
[Caveats]-
[1]You can choose only SATA HDDs when using embedded software RAID.
[2]You can choose only SAS HDDs or SAS/SATA SSDs when using the Cisco 12G SAS Modular RAID Controller or Cisco 12 Gbps Modular SAS HBA.
[3]You can mix HDDs and SSDs as long as you keep all HDDs in their own RAID volume and all SSDs in their own RAID volume.
[4]You can mix SAS HDDs and SAS/SATA SSDs when using the Cisco 12G SAS Modular RAID Controller or Cisco 12 Gbps Modular SAS HBA.
[5]If you order one or two boot drives, you can order a maximum of one GPU and it must be installed in Riser 2 (UCSC-PCI-2-C240M4) slot 5. Cisco UCS C240 M4 High-Density Rack Server (Small Form Factor Disk Drive Model)44 CONFIGURING the SERVER
[6] If you order any NVMe SFF 2.5” drives, you must also order two CPUs.
[7]A maximum of two NVMe SFF 2.5” drives can be ordered.
[8]NVMe SFF 2.5"" drives are bootable only in standalone mode with IMC software and in UEFI mode only.
[9]NVMe HHHL drives are not bootable.
[10]NVMe SFF 2.5” drives cannot be controlled with a RAID controller.

Available SED 2.5" SFF Hot-pluggable Drives

Product ID (PID) PID Description Drive Type Capacity
HDDs (15K RPM)
UCS-HD600G15K9 600 GB 12G SAS 15K RPM SFF HDD (SED) SAS 600 GB
HDDs (10K RPM)
UCS-HD18G10K92 1.8 TB 12G SAS 10K RPM SFF HDD (SED), (4K sector format)) SAS 1.8 TB
UCS-HD12G10K9 1.2 TB 12G SAS 10K RPM SFF HDD (SED) SAS 1.2 TB
UCS-HD300G10K9 300 GB 12G SAS 10K RPM SFF HDD (SED) SAS 300 GB
SSDs
Enterprise Performance SSDs (High endurance, supports up to 10X or 3X DWPD (drive writes per day))2
UCS-SD16TBEK9 1.6 TB Enterprise performance SAS SSD (10X DWPD, SED) SAS 1.6 TB
UCS-SD800GBEK9 800 GB Enterprise performance SAS SSD (10X DWPD, SED) SAS 800 GB
UCS-SD400GBEK9 400 GB Enterprise performance SAS SSD (10X DWPD, SED) SAS 400 GB
UCS-SD600GBE3K9 600 GB Enterprise performance SATA SSD (3X DWPD, SED) SATA 600 GB
Enterprise Value SSDs (Low endurance, supports up to 1 FDWP (Full drive write per day))3
UCS-SD960GBE1K9 960 GB Enterprise value SATA SSD (1X DWPD, SED) SATA 960 GB
UCS-SD480GBE1K9 480 GB Enterprise Value SATA SSD (1X DWPD, SED) SATA 480 GB
UCS-SD120GBE1K9 120GB Enterprise Value SATA SSD (1X DWPD) SATA 120 GB
UCS-SD240GBM1K9 240GB Enterprise Value SSD (SATA) (1X FWPD, SED) SATA 240 GB
UCS-SD960GBM1K9 960GB Enterprise Value SSD (SATA) (1X FWPD, SED) SATA 960 GB
UCS-SD38TBM1K9 3.8TB Enterprise Value SSD (SATA) (1X FWPD, SED) SATA 3.8 TB
Footnote:
[1]For all self-encrypting drives (SED), standalone Management (CIMC) is supported for configuring and managing local keys (UCSM is not supported). For now, SED drives are managed with local key management only. In the future, third-party key management will be supported. Also, 4K sector format drives do not support Vmware and require UEFI boot.
[2]Targeted for write centric IO applications. Supports endurance of 10X or 3X DWPD (drive writes per day). Target applications are caching, online transaction processing (OLTP), data warehousing, and virtual desktop infrastructure (VDI).
[3]Targeted for read centric IO applications. Supports endurance of 1X DWPD (drive writes per day). Target applications are boot, streaming media, and collaboration.
[Approved Configurations]-
[1]For systems with an 8-drive backplane:
  • The embedded software RAID default supports up to 8 internal SATA HDDs with RAID 0, 1, 10 support.
  • The embedded software RAID 5 upgrade key option supports up to 8 internal SATA HDDs with RAID 0, 1, 10, 5 support.
[2]or systems with a 16-drive backplane:
  • The Cisco 12G SAS Modular RAID controller upgrade option supports up to 16 internal SAS HDDs and SAS/SATA SSDs.
    • The Cisco 12G SAS Modular RAID controller with FBWC option (supports JBOD, RAID 0, 1, 10, 5, 6, 50, and 60)
[3]For systems with a 24-drive backplane:
  • The Cisco 12G SAS Modular RAID controller upgrade option supports up to 24 internal SAS HDDs and SAS/SATA SSDs.
    • The Cisco 12G SAS Modular RAID controller with FBWC option (supports JBOD, RAID 0, 1, 10, 5, 6, 50, and 60)
[Caveats]-
[1]You can choose only SATA HDDs when using embedded software RAID.
[2]You can choose only SAS HDDs or SAS/SATA SSDs when using the Cisco 12G SAS Modular RAID Controller.
[3]You can mix HDDs and SSDs as long as you keep all HDDs in their own RAID volume and all
[4]SSDs in their own RAID volume.
[5]You can mix SAS HDDs and SAS/SATA SSDs when using the Cisco 12G SAS Modular RAID Controller.
[6]Non-SED drives can be mixed with the SED drives
[7]SED drives are compatible with only with the combination of a UCSC-MRAID12G RAID controller along with one of the flash-back write cache modules:
  • UCSC-MRAID12G-1GB
  • UCSC-MRAID12G-2GB
  • UCSC-MRAID12G-4GB

Available PCIe Option Cards

Product ID (PID) PID Description Card Height
Modular LAN on Motherboard (mLOM)
UCSC-MLOM-C10T-02 Cisco UCS VIC1227T VIC MLOM - Dual Port 10GBaseT N/A
UCSC-MLOM-CSC-02 Cisco UCS VIC1227 VIC MLOM - Dual Port 10Gb SFP+ N/A
UCSC-MLOM-IRJ45 Intel i350 quad-port MLOM NIC N/A
UCSC-MLOM-C40Q-03 Cisco VIC 1387 Dual Port 40Gb QSFP CNA MLOM N/A
Virtual Interface Cards (VICs)
UCSC-PCIE-CSC-02 Cisco VIC 1225 Dual Port 10Gb SFP+ CNA Half
UCSC-PCIE-C10T-02 Cisco VIC 1225T Dual Port 10GBaseT CNA Half
UCSC-PCIE-C40Q-03 Cisco VIC 1385 Dual Port 40Gb QSFP+ CNA w/RDMA Half
Network Interface Cards (NICs)
1 Gb NICs
UCSC-PCIE-IRJ45 Intel i350 Quad Port 1Gb Adapter Half
10 Gb NICs
N2XX-AIPCI01 [3] Intel X520 Dual Port 10Gb SFP+ Adapter Half
UCSC-PCIE-ITG Intel X540 Dual Port 10GBase-T Adapter Half
UCSC-PCIE-QNICBT QLogic QLE8442 dual-port 10Gbase-T NIC Half
UCSC-PCIE-QNICSFP QLogic QLE8442 dual-port 10G SFP+ NIC Half
UCSC-PCIE-ID10GC Intel X550-T2 dual-port 10GBase-T NIC Half
UCSC-PCIE-ID10GF Intel X710-DA2 dual-port 10G SFP+ NIC Half
UCSC-PCIE-IQ10GF Intel X710 quad-port 10G SFP+ NIC Half
25 GB NICs
UCSC-PCIE-QD25GF Qlogic QL41212H dual-port 25G NIC Half
40 GB NICs
UCSC-PCIE-ID40GF Intel XL710 dual-port 40G QSFP+ NIC Half
10 Gb Converged Network Adapters (CNAs)
UCSC-PCIE-E14102B Emulex OCe14102B-UX dual-port 10G SFP+ with iSCSI, FCoE CNA Half
UCSC-PCIE-E14102 Emulex OCe14102-UX dual-port 10 GbE FCoE CNA Half
UCSC-PCIE-Q8362 Qlogic QLE8362 dual-port 10 GbE FCoE CNA Half
Host Bus Adapters (HBAs)
UCSC-PCIE-BS32GF Broadcom LPe32000 Single-Port 32G FC HBA Half
UCSC-PCIE-BD32GF Broadcom LPe32002 Dual-Port 32G FC HBA Half
UCSC-PCIE-QD32GF Qlogic QLE2742 dual-port 32G FC HBA N2XX-AQPCI05 Qlogic QLE2562 Dual Port 8Gb Fibre Channel HBA Half
N2XX-AQPCI05 Qlogic QLE2562 Dual Port 8Gb Fibre Channel HBA Half
UCSC-PCIE-Q2672 Qlogic QLE2672-CSC, 16Gb Fibre Channel HBA with SR Optics N2XX-AEPCI05 Emulex LPe 12002 Dual Port 8Gb Fibre Channel HBA Half
N2XX-AEPCI05 Emulex LPe 12002 Dual Port 8Gb Fibre Channel HBA Half
UCSC-PCIE-E16002 Emulex LPe16002-M6, 16Gb Fibre Channel HBA with SR Optics Half
UCS Storage Accelerators [4]
UCSC-F-S13002 UCS Rack PCIe Storage 1300 GB SanDisk SX350 Medium Endurance Half
UCSC-F-S16002 UCS Rack PCIe Storage 1600 GB SanDisk SX350 Medium Endurance Half
UCSC-F-S32002 UCS Rack PCIe Storage 3200 GB SanDisk SX350 Medium Endurance Half
UCSC-F-S64002 UCS Rack PCIe Storage 6400 GB SanDisk SX350 Medium Endurance Full
UCS NVMe/PCie Add in Cards
UCSC-F-H38001 3.8 TB NVMe/PCIe storage (HGST SN150) Read Intensive Half
UCSC-NVME-H64003 Cisco HHHL AIC 6.4T HGST SN260 NVMe Extreme Perf High Endurance HHHL*
UCSC-NVME-H76801 Cisco HHHL 7.7T HGST SN260 NVMe Extreme Perf Value Endurance HHHL*
UCSC-NVME-H32003 Cisco HHHL AIC 3.2T HGST SN260 NVMe Extreme Perf High Endurance HHHL*
*HHHL= Half Height Half Length
Footnote:
[1]The GPU cards must be inserted into a full length x16 (electrical) PCIe slot. The rest of the PCIe cards are x8 (electrical) and can be plugged into any PCIe slot of riser 1 or riser 2.
[2]The mLOM cards do not plug into any of the riser 1 or riser 2 card slots
[3]The Intel X520 supports the following Cisco PIDs:
UCS-SFP-1WLR and UCS-SFP-1WSR SFPs. Refer to the Intel X520 product brief for a full list of supported optics and cables.
[4]A maximum of six storage accelerator cards are supported and some are riser dependent. 1.3 TB, 2.6 TB, or 3.2 TB cards should not be installed in slots 5 or 6 so the total number of those capacity points is four.
[Caveats]-
[]If you choose an external drives controller (Cisco 9300-8e 12G SAS HBA), it will consume one PCIe slot.
[]A maximum of six storage accelerator cards are supported and some are riser dependent. 1.3 TB, 2.6 TB, or 3.2 TB cards should not be installed in to slots 5 or 6 so the total number of those capacity points is four.
[For 1-CPU systems:]Only the PCIe slots on PCIe riser 1 are available for 1-CPU system.
[-]The PCIe slots on riser 2 are not supported on 1-CPU systems. The slots are full-height PCIe slots 4, 5, and 6
[-]Only a single plug-in PCIe VIC card may be installed on a 1-CPU system, and it must be installed in slot 2 of riser 1. You can order an mLOM VIC card to be installed in the mLOM slot internal to the chassis and thus have two VIC cards in operation at the same time.
[For 2-CPU systems:]Depending on the riser 1 option chosen, up to six PCIe slots are available, three on PCIe riser 1 (PCIe slots 1, 2, and 3) and three on PCIe riser 2 (PCIe slots 4, 5, and 6).
[-]All of the slots are full-height.
[-]Two plug-in PCIe VIC cards can be installed in 2-CPU systems, using slots 2 and 5. In addition, you can order an mLOM VIC card, which is installed in the mLOM slot inside the chassis and thus have three VIC cards in operation at the same time.
[-]If GPUs are installed in slots 2 (Riser 1 option A) and 5 (Riser 2), the NCSI capability automatically switches over to slots 1 (Riser 1 option A) and 4 (Riser 2). Therefore, Cisco PCIe VICs can be installed in slots 1 and 4 if GPUs are installed in slots 2 and 5.
[Notes]UCSM managed servers are discoverable only if a VIC 1225 is installed in slot 2 or a VIC 1227/1227T is installed in the MLOM slot. If you install two GPUs, they must be located in slots 2 and 5. Therefore, if two GPUs are installed, UCSM managed servers are discoverable only if you install a VIC 1227/1227T in the MLOM slot.
[-]The quantity and type of PCIe cards that can be installed depends in the riser card options.

Available Fabric I/O Extenders

Product ID(PID) PID Description
Available Twinax Cables
SFP-H10GB-CU1M10GBASE-CU SFP+ Cable (1 M)
SFP-H10GB-CU3M10GBASE-CU SFP+ Cable (3 M)
SFP-H10GB-CU5M10GBASE-CU SFP+ Cable (5 M)
Available SFP Modules
SFP-10G-SR10GBASE-SR SFP+ Module 850 nm, multimode, SR, 3.3V, LC connector, with Digital Optical Monitoring
SFP-10G-LR10GBASE-LR SFP+ Module 1310 nm, single mode, LR, 3.3 V, with Digital Optical Monitoring
DS-SFP-FC8G-SW8 Gbit SFP+ Module 850 nm, multimode, SR, 3.3V, LC connector, with Digital Optical Monitoring
Footnote:
[Approved Configurations]-
[1]Choose Up to Two Twinax Cables for Each Network Card Ordered
You may choose one or two twinax cables for each compatible PCIe network card ordered. The cables can be different lengths
[2]Choose Up to Two SFP+ Modules for Each Network Card Ordered
You may choose one or two SFP+ optical modules cables for each compatible PCIe network card ordered. You would normally order two modules for connecting to the primary and redundant network switching equipment. With the SFP+ optical modules, you can use common fiber optic cables, widely available.

Available Power Supply

Product ID (PID) PID Description
UCSC-PSU2V2-1400W1400W V2 AC Power Supply (200 - 240V) 2U & 4U C Series
UCSC-PSU2V2-1200W [1]1200W / 800W V2 AC Power Supply for 2U C-Series Servers
UCSC-PSU-930WDC930 W -48V DC Common Slot Power Supply for C-series servers
UCSC-PSU2V2-930DC930 W - 48V V2 DC Power Supply for 2U C-Series Servers
UCSC-PSU2V2-650W650W V2 AC Power Supply for C-Series Servers
Footnote:
[1]The C240 M4 server requires at least one power supply. A lightly loaded server may require one or two 650 W power supplies. A fully loaded server might need to be powered with two larger capacity power supplies. A server with one GPU requires at least two power supplies (1400 W power supplies are recommended). A server with two GPUs also requires at least two power supplies (1400 W power supplies are recommended
[2]In a two power supply server, both power supplies must be identical

Available Power Cords

Product ID (PID) PID Description
R2XX-DMYMPWRCORDNo power cord (dummy PID to allow for a no power cord option)
CAB-N5K6A-NAPower Cord, 200/240V 6A, North America
CAB-AC-L620-C13AC Power Cord, NEMA L6-20 - C13, 2M/6.5ft
CAB-C13-CBNCABASY,WIRE,JUMPER CORD, 27" L, C13/C14, 10A/250V
CAB-C13-C14-2MCABASY,WIRE,JUMPER CORD, PWR, 2 Meter, C13/C14,10A/250V
CAB-C13-C14-ACCORD,PWR,JMP,IEC60320/C14,IEC6 0320/C13, 3.0M
CAB-250V-10A-ARPower Cord, 250V, 10A, Argentina 186571 2500 mm Cordset rating: 10 A, 250/500 V MAX Length: 8.2 ft Plug: EL 219 (IRAM 2073) Connector: EL 701 (IEC60320/C13)
CAB-9K10A-AUPower Cord, 250VAC 10A 3112 Plug, Australia Plug: Cordset rating: 10 A, 250 V/500 V MAX Length: 2500mm 186580 Connector: EL 701C EL 210 (EN 60320/C15) (BS 1363A) 13 AMP fuse
CAB-250V-10A-CNAC Power Cord - 250V, 10A - PRC
CAB-9K10A-EUPower Cord, 250VAC 10A CEE 7/7 Plug, EU Connector: VSCC15 Cordset rating: 10A/16 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: M2511 186576
CAB-250V-10A-IDPower Cord, SFS, 250V, 10A, India
CAB-250V-10A-ISPower Cord, SFS, 250V, 10A, Israel
CAB-9K10A-ITPower Cord, 250VAC 10A CEI 23-16/VII Plug, Italy Plug: I/3G (CEI 23-16) Connector C15M (EN60320/C15 ) Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) 186575
CAB-9K10A-SWPower Cord, 250VAC 10A MP232 Plug, Switzerland Plug: MP232-R Cordset rating: 10 A, 250 V Length: 8 ft. 2 in (2.5 m) 186578 Connector: IEC 60320 C15
CAB-9K10A-UKPower Cord, 250VAC 10A BS1363 Plug (13 A fuse), UK
CAB-9K12A-NAPower Cord, 125VAC 13A NEMA 5-15 Plug, North America
CAB-250V-10A-BRPower Cord - 250V, 10A - Brazil
CAB-JPN-3PINPower Cord 3PIN, Japan
CAB-C19-C20-3M-JPPower Cord C19-C20, 3M/10ft Japan PSE mark

Available Tool-less Rail Kit

Product ID (PID) PID Description
UCSC-RAIL-NONENo rail kit option
UCSC-RAILB-M4Ball Bearing Rail Kit for C220 and C240 M4/M5 Rack Servers

Available NIC Mode (Optional)

Product ID (PID) PID Description
UCSC-DLOM-01Dedicated Mode BIOS setting for C-Series Servers
UCSC-CCARD-01Cisco Card Mode BIOS setting for C-Series Servers
Footnote:
[1]By default, the C220 M4 server NIC mode is configured to be Shared LOM Extended. This NIC mode allows any LOM port or adapter card port to be used to access the Cisco Integrated Management Controller (CIMC). The Cisco VIC card must be installed in a slot with NCSI support.
[2]To change the default NIC mode to Dedicated, select the UCSC-DLOM-01 PID shown in Table Above. In Dedicated NIC mode, the CIMC can be accessed only through the dedicated management port.
[3]To change the default NIC mode to Cisco Card Mode, select the UCSC-CCARD-01 PID shown in Table Above. In this mode, you can assign an IP address to the CIMC using DHCP and from there you can fully automate your deployment.

Available Security Devices (Optional)

Product ID (PID) PID Description
UCSX-TPM2-001Trusted Platform Module 1.2 SPI-based for UCS Servers
UCSX-TPM2-002Trusted Platform Module 2.0 for UCS servers
Footnote:
[1]A Trusted Platform Module (TPM) is a computer chip (microcontroller) that can securely store artifacts used to authenticate the platform (server). These artifacts can include passwords, certificates, or encryption keys. A TPM can also be used to store platform measurements that help ensure that the platform remains trustworthy. Authentication (ensuring that the platform can prove that it is what it claims to be) and attestation (a process helping to prove that a platform is trustworthy and has not been breached) are necessary steps to ensure safer computing in all environments.
[2]A chassis intrusion switch gives a notification of any unauthorized mechanical access into the server.
[Notes]The TPM module used in this system conforms to TPM v1.2 and 2.0, as defined by the Trusted Computing Group (TCG). It is also SPI-based.
[1]TPM installation is supported after-factory. However, a TPM installs with a one-way screw and cannot be replaced, upgraded, or moved to another server. If a server with a TPM is returned, the replacement server must be ordered with a new TPM.

Cisco SD Card Module (Optional)

Product ID (PID) PID Description
UCS-SD-128G128 GB SD Card for UCS Servers
UCS-SD-64G-S64 GB SD Card for UCS Servers
UCS-SD-32G-S32 GB SD Card for UCS Servers
Footnote:
[1]Order one or two matching SD cards. See Figure 5 on page 73 for the location of the mini storage module connector, which accommodates an SD module. Each SD module accommodates two SD cards.
[Caveats]-
[1]Install either one or two SD cards
[2]Do not mix SD card sizes
[3]You cannot mix SD cards with an internal M.2 SATA SSD

USB 3.0 Drive (Optional)

Product ID (PID) PID Description
UCS-USBFLSHB-16GBUCS Servers 16 GB Flash USB Drive
Footnote:
[1]Please view the images above to find the location of the USB connector.

Spare Parts List

Product ID (PID) PID Description
UCSC-PCIF-01F=PCIe Full Height blanking panel for UCS C-Series Server1
UCSC-PCIF-C240M4=C240 M4 PCIe Riser Blanking Panel1
UCSC-PCI-2-C240M4=C240 M4 PCIe Riser 2 Assembly1
UCSC-PCI-1A-240M4=C240 M4 PCIe Riser 1 Assembly (x8 slot + GPU)1
UCSC-PCI-1B-240M4=C240 M4 PCIe Riser 1 Assembly (3 x8 slots)1
UCSC-PCI-1C-240M4=C240 M4 PCIe Riser 1 Assembly (SATA Boot + 2 PCIe slots)1
UCSC-IP-SSD-240M4=PCIe interposer board + cable for PCIe SSD (8 and 16 HDD backplane versions)1
UCSC-IPSSD-240M48=PCIe interposer board + cable for PCIe SSD (24 HD backplane version)1
UCSC-IP-PCH-240M4=Interposer board + cables for onboard PCH SATA 6G Embedded Software RAID1
UCSC-MLOM-BLK=MLOM Blanking Panel
UCS-240CBLMR8=C240 M4 (2) RAID controller cables for 8 HD backplane2
UCS-240CBLMR16=C240 M4 (2) RAID controller cables for 16 HD backplane2
UCS-240CBLMR24=C240 M4 (2) RAID controller cables for 24 HD backplane2
UCSC-HS-C240M4=Heat Sink for UCS C240 M4 Rack Server1
UCS-CPU-CVR-EP-M4=CPU load plate dust cover (for unpopulated CPU sockets)
UCSC-GPUCBL-240M4=C240 M4 GPU Power Cable (1 cable per GPU card)1
N20-MBLIBATT=Replacement Lithium Battery for Server Motherboard (CR2032)1
UCSC-FAN-C240M4=C240 M4 Fan Module (one)
UCSC-BAFF-C240M4=C240 M4 Air Baffle Replacement Kit
UCSC-PSU-BLKP240=Power Supply Blanking Panel for C240 M4 Servers1
UCSC-RAILB-M4=Tool-Less Ball Bearing Rail Kit for C220 M4 and C240 M4 rack servers
UCSC-CMAB-M4=Reversible CMA for C240 M4 ball bearing rail kit
UCS-SD-32G-S=32 GB SD Card for UCS servers3
UCS-SD-64G-S=64 GB SD Card for UCS servers2
UCS-USBFLSHB-16GB=UCS Servers 16 GB Flash USB Drive
N20-BKVM=KVM local IO cable for UCS servers console port
UCS-CPU-GREASE3=M4 Server CPU thermal grease syringe - needed for heatsink seal4
UCSX-HSCK=UCS Processor Heat Sink Cleaning Kit (when replacing a CPU)3
UCSC-MRAID-SC=SuperCap for Cisco 12G SAS Modular RAID, including all cables.
UCSC-IP-SSD-240M4=PCIe 8639 interposer board + cable for PCIe SSD (8&16 HD)
UCSC-IPSSD-240M4B=PCIe 8639 interposer board + cable for PCIe SSD (24 HD)
UCS-300WKIT-240M4=300 Watt Cable, HS and Kit for UCS C240M4 Rack Server Includes two heat sinks and two power cables
Footnote:
[1]A drive blanking panel must be installed if you remove a disk drive from a UCS server. These panels are required to maintain system temperatures at safe operating levels, and to keep dust away from system components.
[2]Required if ordering the RAID controller as a spare or to replace damaged cables

PCIe Card Compatibility

PCIe Cards Twinax Cables Cisco SFP Modules
SFP-10G-SR SFP-10G-LR DS-SFP-FC8G-SW
Converged Network Adapters (CNAs)
UCSC-PCIE-BSFP (Broadcom 57712 Dual Port 10Gb SFP+ w/TOE iSCSI) Yes Yes No
UCSC-PCIE-CSC-02 (Cisco VIC 1225 Dual Port 10Gb SFP+ CNA) Yes Yes Yes No
UCSC-PCIE-C10T-02 (Cisco VIC 1225T Dual Port 10GBaseT CNA) No No No No
UCSC-MLOM-CSC-02 (Cisco UCS VIC1227 VIC MLOM - Dual Port 10Gb SFP+) Yes Yes Yes No
UCSC-MLOM-C10T-02 (Cisco UCS VIC1227T VIC MLOM - Dual Port 10GBaseT) No No No No
UCSC-PCIE-C40Q-02 (Cisco VIC 1285 Dual Port 40Gb QSFP CNA) Yes No [1] No
UCSC-PCIE-C40Q-03 (Cisco VIC 1385 Dual Port 40Gb QSFP+ CNA w/RDMA) Yes No [1] No
UCSC-PCIE-ESFP (Emulex OCe11102-FX dual-port 10 GbE FCoE CNA (Gen 3 CNA)) Yes Yes No
UCSC-PCIE-QSFP (QLogic QLE8242-CU dual-port 10 GbE FCoE CNA) Yes Use Qlogic SFP
UCSC-PCIE-B3SFP (Broadcom 57810 10Gb A-FEX SFP+ Yes Yes No
UCSC-PCIE-Q8362 (Qlogic QLE8362 dual-port 10 GbE FCoE CNA) Yes Use Qlogic SFP
UCSC-PCIE-E14102 (Emulex OCe14102-UX dual-port 10 GbE FCoE CNA) Yes Yes No
Converged Network Adapters (CNAs)
N2XX-ABPCI01-M3 (Broadcom 5709 Dual-Port Ethernet PCIe Adapter for M3 Servers) Use RJ45 Ethernet cable
N2XX-ABPCI03-M3 (Broadcom 5709 Quad Port 10/100/1Gb NIC w/TOE iSCSI for M3 Servers Use RJ45 Ethernet cable
N2XX-AIPCI01 (Intel X520 Dual Port 10Gb SFP+ Adapter) Yes Use Intel SFP UCS-SFP-1WLR or UCS-SFP-1WSR
UCSC-PCIE-ITG (Intel X540 Dual Port 10GBase-T Adapter) Use RJ45 Ethernet cable
UCSC-PCIE-IRJ45 (Intel i350 Quad Port 1Gb Adapter Use RJ45 Ethernet cable
UCSC-PCIE-IRJ45 (Intel i350 Quad Port 1Gb Adapter Yes No No
Host Bus Adapters (HBAs)
N2XX-AEPCI03 (Emulex LPe 11002 Dual Port 4Gb Fibre Channel HBA No Preinstalled - do not change SFP
N2XX-AEPCI05 (Emulex LPe 12002 Dual Port 8Gb Fibre Channel HBA) No Preinstalled - do not change SFP
N2XX-AQPCI03 (QLogic QLE2462 Dual Port 4Gb Fibre Channel HBA) No Preinstalled - do not change SFP
N2XX-AQPCI05 (QLogic QLE2562 Dual Port 8Gb Fibre Channel HBA) No Preinstalled - do not change SFP
UCSC-PCIE-Q2672 (Qlogic QLE2672-CSC, 16Gb Fibre Channel HBA with SR Optics) No Preinstalled - do not change SFP
UCSC-PCIE-E16002 (Emulex LPe16002-M6, 16Gb Fibre Channel HBA with SR Optics) No Preinstalled - do not change SFP
Footnotes:
[1] This card supports a 4x10 Gbps QSFP to SFP breakout fiber cable.

Shipping Information

Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

Custom configured orders ship within 2 business days after all required products are in stock.

Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

Domestic Shipments
  • Standard Ground
    • Shipping time: 2-7 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-10 business days
    • Excludes weekends, holidays or weather delays.
  • 3 Business Days
    • Shipping time: 3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 3-6 business days
    • Excludes weekends, holidays or weather delays.
  • 2 Business Days
    • Shipping time: 2 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-5 business days
    • Excludes weekends, holidays or weather delays.
  • Overnight / Next Business Day
    • Shipping time: 1 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 1-4 business days
    • Excludes weekends, holidays or weather delays.
International Shipments
  • International Economy
    • Shipping time: 4-6 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 5-9 business days
    • Excludes weekends, holidays or weather delays.
  • International Priority
    • Shipping time: 1-3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-6 business days
    • Excludes weekends, holidays or weather delays.

For more information on shipping view our Shipping Information page or send us a message

ECS Warranty Information

Express Computer Systems (ECS) provides a 1 year parts warranty against defects in material or workmanship that will affect the products functionality. All refurbished items are tested prior to shipping to guarantee up-time upon arrival. If you are having issues with an item we provided please Contact Us and we will do our best to assist you.

What does our ECS warranty cover?
We offer 1 year warranty as standard and additional years can be added to fit your needs. Please reach out to a sales associate via the Contact Us page or live chat for more information on extended coverage options. During the coverage period if your product fails we will offer a Next Business Day replacement. If we are unable to replace the product we will refund its original selling price. Shipping costs and tax are not refundable. Express Computer Systems retains the right to decide whether the goods will be replaced or refunded.

What is not covered by our warranty?
Our warranty does not cover any problem caused by the following conditions:

  1. accidents; misuse; carelessness; electrostatic discharge; shock; temperature or humidity beyond the specifications of the product; improper installation; operation; modification;
  2. any improper use that contravenes the instructions in the user manual;
  3. problems caused by other equipment. Our warranty is void if the product is returned with damaged, removed, counterfeit labels, or any modifications (including any component or external cover removal). Our warranties do not cover data loss or damages to any other equipment. In addition, our warranties do not cover incidental damages, consequential damages, or costs related to data recovery, removal, and installation.

Important notes:

  • Please ask for additional warranty/coverage that you may require in addition to the standard 1 ECS warranty prior to final purchase. Requesting additional warranty after your purchase can be denied.
  • FREE technical support is provided on purchased items via phone, email, or live chat.

About Express Computer Systems

Express Computer Systems is committed to transforming our customers’ IT infrastructure with high quality products at affordable costs. Our sales reps and customer support engineers understand our customers rely heavily on advanced technology to run their business but need to do so without breaking the bank.

We specialize in building custom server configurations, custom storage solutions, networking solutions, and components from top manufacturers including HPE, Dell, Cisco, NetApp, Dell EMC, HPE Nimble and many others.

Subscribe