This website performs best when viewed from a Desktop

All

  • All
  • AMD
  • Cisco
  • Dell
  • EMC
  • EqualLogic
  • Express Computer Systems
  • HPE
  • Intel
  • NetApp

HPE Synergy 480 Gen9 CTO Compute Module

MPN:  
480G9
Brand:  
HPE
Type:  
CTO Servers
Condition:  
ECS Refurbished & Tested

-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

Synergy 480 Gen9 Product Description

The HPE Synergy 480 Gen9 Compute Module delivers superior capacity, efficiency, and flexibility in a two-socket, half-height form factor to support demanding workloads. Powered by Intel's® latest E5-2600 v4 processors, HPE DDR4 SmartMemory supporting up to 1.5 TB, flexible storage controller options, three I/O connectors, and designed to create a pool of flexible compute capacity within a composable infrastructure the HPE Synergy 480 Gen9 Compute Module is the ideal platform for general-purpose enterprise workload performance now and in the future.

Run Anything

The HPE Synergy 480 Gen9 Compute Module supports up to 1.5 TB of HPE DDR4 SmartMemory and Intel Xeon E5-2600 v4 processors in a 2-socket, half-height form factor to support demanding workloads like collaborative/content/business applications, IT/Web Infrastructure, and GPU applications.

The flexible design supports stateless configuration without drives, up to two SFF or four uFF drives, NVMe PCIe workload acceleration, and direct attach composable storage to match demanding workload, data protection, and data security requirements.

Three mezzanine connectors with simplified I/O architecture for expandability, choice of fabric, and long-term design for improved ROI.

Move Faster

The HPE Synergy 480 Gen9 Compute Module supports up to 1.5 TB of HPE DDR4 SmartMemory and Intel® Xeon® E5-2600 v4 processors in a 2-socket, half-height form factor to support demanding workloads like collaborative/content/business applications, IT/Web Infrastructure, and GPU applications.

The flexible design supports stateless configuration without drives, up to two SFF or four uFF drives, NVMe PCIe workload acceleration, and direct attach composable storage to match demanding workload, data protection, and data security requirements.

Three mezzanine connectors with simplified I/O architecture for expandability, choice of fabric, and long-term design for improved ROI.

Graphics Processing Options

The HPE Synergy 480 Gen9 Compute Module now offers the Synergy SY 480 Mezzanine Graphics Accelerator support for the NVIDIA Tesla M6, NVIDIA Quadro M3000SE and AMD Firepro S7100. These GPUs provide graphics acceleration for a Compute Module.

Synergy SY 480 Graphics Multi-MXM Expansion Module. This single height, single-wide module supports up to 7 - 100 watt MXM GPUs. The module also has two Mezz pass-through slots 4 & 5 available.

Synergy SY 480 Graphics PCIe 3.0 Expansion Module. This single height, single-wide module supports up to two - 300 watt, full size, double-wide GPU PCIe cards.

Synergy SY 480 GPU Support. NVIDIA Tesla M6, Quadro M3000SE and AMD S7100X MXM GPUs for use with the Multi-MXM Module. NVIDIA Quadro M5000 GPU in the PCIe Module.

Product features

Feature
Description
Processor 1
  • HPE Synergy 480 Gen9 Intel Xeon E5-2699 v4 (2.2 GHz/22-core/55MB/145 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2698 v4 (2.2 GHz/20-core/50MB/135 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2697 v4 (2.3 GHz/18-core/45MB/145 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2697A v4 (2.6 GHz/16-core/40MB/145 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2695 v4 (2.1 GHz/18-core/45MB/120 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2690 v4 (2.6 GHz/14-core/35MB/135 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2683 v4 (2.1 GHz/16-core/40MB/120 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2680 v4 (2.4 GHz/14-core/35MB/120 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2667 v4 (3.2 GHz/8-core/25MB/135 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2660 v4 (2.0 GHz/14-core/35MB/105 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2650 v4 (2.2 GHz/12-core/30MB/105 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2650L v4 (1.7 GHz/14-core/35MB/65 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2643 v4 (3.4 GHz/6-core/20MB/135 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2640 v4 (2.4 GHz/10-core/25MB/90 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2637 v4 (3.5 GHz/4-core/15MB/135 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2630 v4 (2.2 GHz/10-core/20MB/85 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2630L v4 (1.8 GHz/10-core/25MB/55 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2623 v4 (2.6 GHz/4-core/10MB/85 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2620 v4 (2.1 GHz/8-core/20MB/85 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2609 v4 (1.7 GHz/8-core/20MB/85 W)

  • HPE Synergy 480 Gen9 Intel Xeon E5-2603 v4 (1.7 GHz/6-core/15MB/85 W)

Cache memory
  • 55MB (1 x 55MB) L3 Cache2

  • 50MB (1 x 50MB) L3 Cache3

  • 45MB (1 x 45MB) L3 Cache4

  • 40MB (1 x 40MB) L3 Cache5

  • 35MB (1 x 35MB) L3 Cache6

  • 30MB (1 x 30MB) L3 Cache7

  • 25MB (1 x 25MB) L3 Cache8

  • 20MB (1 x 20MB) L3 Cache9

  • 15MB (1 x 15MB) L3 Cache10

  • 10MB (1 x 10MB) L3 Cache11

Chipset
Intel C610 series chipset
On system management chipset
HPE Integrated Lights Out (iLO) (Firmware HPE iLO4 2.0)
4GB NAND With 1GB USB user space configurable via UEFI and accessible via iLO
Memory protection
  • Advanced ECC

  • Memory mirroring

  • Memory online spare mode (Rank spare mode)

Memory 12
Type
HPE SmartMemory DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)
Dual In-Line Memory Module (DIMM) slots available
24 (12 DIMM Slots per processor, 4 channels per processor, 3 DIMMs per channel)
Maximum capacity (LRDIMM)
1.5TB (24 x 64GB)
Maximum capacity (RDIMM)
768GB (24 x 32GB)
Network controller
  • HPE Synergy 3820C 10/20Gb converged network adapter13

  • HPE Synergy 2820C 10/20Gb converged network adapter14

  • Standard iLO network controller: One (1) 1 Gb/s port for the HPE iLO 4 to HPE Frame link module connection

Mezzanine connectors
Three (3) I/O expansion mezzanine connectors:
  • x16 PCIe 3.0 Type D (Supports type C and type D mezzanine cards) (Mezzanine connector 1)15

  • x16 PCIe 3.0 Type D (Supports type C and type D mezzanine cards (Mezzanine connector 2)16

  • x16 PCIe 3.0 Type C (Supports type C mezzanine cards) (Mezzanine connector 3)17

Mezzanine options include:
  • Dual-Port 10/20Gb compute module mezzanine adapter options for additional network ports

  • Dual-Port 16Gb fibre channel HBA options for SAN connectivity

Storage controller
  • HPE Smart Array P240nr Controller with 1GB Flash-Backed Write Cache (FBWC) supporting RAID 0, 1, 10, 5, 6, and 1 ADM

  • HPE Smart Array P542D Controller with 2GB FBWC supporting RAID 0, 1, 10, 5, 50, 6, 60, 1 ADM, and 10 ADM

  • HPE H240nr Smart HBA supporting RAID 0, 1, 10, 5

  • HPE B140i (Chipset SATA)

Compute module ROM
HPE Read only memory (ROM) is now digitally signed using the HPE Corporate signing service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM
HPE Synergy compute ROM is used to configure the following:
  • Processor and chipset status registers

  • System memory, memory map, and memory initialization

  • System hardware configuration (Integrated PCI devices and optional PCIe cards)

  • User-specific BIOS configuration using the UEFI system utilities

Maximum internal storage
Models
Capacity
Configuration
Hot Plug SFF SAS
4.0TB
2 x 2.0TB
Hot Plug SFF SATA
4.0TB
2 x 2.0TB
Hot Plug SFF SAS SSD
7.68TB
2 x 3.84TB
Hot Plug SFF SATA SSD
3.2TB
2 x 1.6TB
Hot Plug SFF NVMe SSD
4.0TB NVMe
2 x 2.0TB NVMe
Hot Plug uFF SATA SSD
1.36TB
4 x 340GB
Interfaces 18
Micro SDHC slot
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot
USB 3.0 port
One (1) internal USB 3.0 connector for USB flash media drive keys
USB 3.0 port
One (1) external USB 3.0 connector for USB flash media drive keys
Industry standard compliance
  • ACPI 2.0

  • Microsoft logo certifications

  • USB 3.0 Support

  • IPMI 2.0

  • Secure digital 2.0

  • TPM 1.2 and 2.0 Support

  • IEEE (Specific IEEE standards depending on Ethernet adapter card(s) installed)

  • Advanced Encryption Standard (AES)

  • Triple Data Encryption Standard (3DES)

  • SNMP

  • SSL 2.0

  • DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)

  • Active directory v1.0

  • PCIe 3.0

  • ASHRAE A3

Graphics
Integrated Matrox G200eh video controller
  • 1600 x 1200 (32 b/p)

  • 1920 x 1200 (16 b/p)

HPE iLO Management on system management memory
  • 16MB Flash video memory

  • 256MB DDR 3 with ECC (112MB after ECC and video)

Form factor
HPE Synergy 480 Gen9 is a half-height compute module that plugs into the HPE 12000 frame.
Management solution
  • HPE Synergy Composer with HPE OneView

  • HPE iLO

  • UEFI

  • HPE RESTful API

  • Intelligent Provisioning

Server utilities
  • Smart update

  • Scripting tools

  • HPE iLO Mobile application

Security
  • Power-On password

  • Administrator's password

  • Keyboard password (QuickLock)

  • HPE iLO management on system management chipset with:
    • SSL encryption

    • Secure Shell version 2

    • AES and 3DES on browser, CLP and XML scripting interface

    • AES and RC4 encryption of video

  • External USB port enable/disable

  • Network server mode

  • Serial interface control

  • TPM 1.2 or 2.0 option

  • AES

  • Intel AES-New Instructions (AES-NI)

Enclosures
HPE Synergy 12000 Frame, is the base for all Synergy products and supports:
  • Up to 12 half-height, 6 full-height single-wide, or 3 full-height double-wide compute modules (Mixing allowed)

  • Up to 5 half-height double-wide HPE Synergy D3940 storage modules (Mixing with compute modules in any to any ratio allowed)

  • One HPE Synergy 12000 Frame will support up to twelve (12) HPE Synergy 480 Gen9 compute modules

NOTE:

    • All processors within the compute module must be identical.
    • HT indicates that the processor model supports Intel Hyper-Threading Technology.
    • Turbo indicates the maximum potential frequency when using Intel Turbo Boost Technology. The frequency boost increment is dependent on the processor SKU and the number of active cores. In general, a higher boost increment is obtained when fewer cores are active.
    • DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.
    • Supports 1 or 2 processors. Mixing different processor models is not supported.
    • For the Intel C610 Chipset E5-2600 v4 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a module, 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
    • The HPE Synergy 480 Gen9 Compute Module includes three I/O mezzanine connectors. A processor must be installed in processor slot 1 for access to mezzanine connector one and three (Mezzanine connectors 1 and 3). A processor must be installed in processor slot 2 for access to the mezzanine connector two (Mezzanine connector 2).
  1. For 22-core processors.
  2. For 20-core processors.
  3. For 18-core processors.
  4. For 16-core processors.
  5. For 14-core processors.
  6. For 12-core processors.
  7. For 8 or 10-core processors.
  8. For 6 or 8 or 10-core processors.
  9. For 4 or 6-core processors.
  10. For Quad-core processors.

    • LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a compute module.
    • HPE memory from previous generation servers (DDR3) is not compatible with this compute module. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen9.
  11. Supports full hardware offload of FCoE storage protocol processing for high performance converged Ethernet data and storage networks.
  12. Delivers flexibility to compose multiple network flows including Ethernet and FCoE or iSCSI within each connection.
  13. This mezzanine connector supports dual-port mezzanine cards: one port is routed to interconnect module bay 1 and the other to bay 4.
  14. This mezzanine connector supports dual-port mezzanine cards: one port is routed to interconnect module bay 2 and the other to bay 5. A second processor must be installed (in processor slot 2) to have access to mezzanine connector 2.
  15. This mezzanine connector supports dual-port mezzanine cards: one port is routed to interconnect module bay 3 and the other to bay 6.
  16. Options are intended for integrated hypervisor virtualization environments.

top

Software overview

Feature
Description
Operating Systems (OS) supports
  • Microsoft Windows Server

  • Microsoft Hyper-V Server

  • Red Hat Enterprise Linux (RHEL)

  • SUSE Linux Enterprise Server (SLES)

  • VMware ESXi

top

Physical specifications

Specification
Description
Height (H x W x D) with bezel
63.5 x 214 x 600 mm (2.5 x 8.43 x 23.62 in)
Weight (Approximate)
Maximum: 8.16 kg (18 lb)
Minimum: 6.57 kg (14.5 lb)

top

Environmental specifications

Specification
Description
Operating temperature
10° to 35° C (50° to 95° F)
Non-operating temperature
-30° to 60° C (-22° to 140° F)
Relative operating humidity
  • 10% to 90%

  • 28° C (82.4° F)

Relative non-operating humidity
  • 5% to 95%

  • 38.7° C (101.7° F)

Acoustic noise
For acoustic noise specifications, please see the HPE Synergy 12000 Frame QuickSpecs

top

Electrical specifications

Specification
Description
Power specification
For power specifications including input requirements, BTU rating, and power supply output, please see the HPE Synergy Frame QuickSpecs
To review typical system power ratings use the HPE Power advisor which is available VIA the online tool located at: Click here to access the "Rack and Power Infrastructure" .

top

Technical specifications

HPE Smart Array P542D Controller
Specification
Description
Storage Interface
  • 12 Gb/s SAS (Serial attached SCSI)

  • 6 Gb/s SATA (Serial advanced technology attachment)

SAS connectors
Two (2) external ports supporting x4 SAS links each and two (2) internal ports supporting x4 SAS links each
SAS speed
x16 12 Gb/s per physical link
PCIe link rate
PCIe 3.0 x8 links
Memory bus speed
DDR3-1866 MHz, 72-bit wide bus at 14.92 GB/s (2 Gb cache module)
Logical drives supported
64 logical drives
Max drives supported
Up to 256 drives (Up to 128 drives per logical drive)
RAID support
  • RAID 6, 60 (Advanced data guarding)

  • RAID 5, 50 (Distributed data guarding)

  • RAID 1, 10 (Drive mirroring)

  • RAID 1 ADM, 10 ADM (Advanced data mirroring)

  • RAID 0 (Striping)

Upgradeable firmware
Flashable ROM with redundant firmware images
HPE Smart Array P240nr/1GB Controller
Specification
Description
Disk drive interface
  • 12 Gb/s SAS (Serial attached SCSI)

  • 6 Gb/s SATA (Serial ATA)

Server interface
x8 5G PCIe 3.0 provides 8 Gb/s maximum bandwidth
Cache memory
1 Gb Flash Backed Write Cache (FBWC) cache standard
Logical drives supported
64 (With included 1Gb cache)
Host memory addressing
64-bit, supporting servers memory space greater than 4Gb
RAID support
RAID 1 (Mirroring), RAID 0 (Striping), RAID 5, RAID 10
Other
Upgradeable firmware with recovery ROM online drive flash (With SAS drives)
HPE H240nr Smart HBA
Specification
Description
Disk drive interface
  • 12 Gb/s SAS (Serial attached SCSI)

  • 6 Gb/s SATA (Serial ATA)

Compute module interface
x8 5G PCIe 3.0 provides 8 Gb/s maximum bandwidth
Cache memory
None
Logical drives supported
64
Host memory addressing
64-bit, supporting compute modules memory space greater than 4Gb
RAID support
RAID 1 (Mirroring) and RAID 0 (Striping), RAID 5, RAID 10
Other
Upgradeable firmware with recovery ROM Online drive flash (With SAS drives)
HPE Dynamic Smart Array B140i Controller
Specification
Description
Disk drive interface
6 Gb/s SATA (Serial ATA)
Compute module interface
Embedded x4 PCIe 2.0
SAS connectors
2 internal SATA ports
Cache memory
None
SAS speed
6 Gb/s SATA links
Logical drives supported
Up to 10 logical volumes (4 physical drives)
Host memory addressing
64-bit, supporting greater than 4Gb compute module memory space
Hot plug support
Yes
RAID support
RAID 1 (Mirroring), RAID 0 (Striping), RAID 5
Other
Upgradeable firmware with recovery ROM
HPE Synergy 2820C 10Gb Converged Network Adapter
Specification
Description
Type
Dual-port 10Gb mezzanine
Network processor
QLogic 57840S with integrated MAC/PHY
Data transfer method
x8 PCI express 3.0
Network transfer rate
Two ports, each at 20 Gb/s full duplex; 40 Gb/s aggregate full duplex theoretical bandwidth
IEEE compliance
802.3, 802.3ab, 802.3u, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.3ap
Standard features
  • Delivers flexibility to compose multiple network flows including Ethernet and FCoE or iSCSI within each connection

  • Full hardware offload of FCoE and iSCSI storage protocol processing for highest performance converged Ethernet data and storage networks

HPE Synergy 3820C 10/20Gb Converged Network Adapter
Specification
Description
Type
Dual-port 10/20 Gb mezzanine
Network processor
QLogic 57840S with integrated MAC/PHY
Data transfer method
x8 PCI express 3.0
Network transfer rate
Two ports, each at 40 Gb/s full duplex; 80 Gb/s aggregate full duplex theoretical bandwidth
IEEE compliance
802.3, 802.3ab, 802.3u, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.3ap
Standard features
  • Delivers flexibility to compose multiple network flows including Ethernet and FCoE or iSCSI within each connection

  • Full hardware offload of FCoE and iSCSI storage protocol processing for highest performance converged Ethernet data and storage networks

HPE Synergy 3830C 16Gb Fibre Channel Host Bus Adapter
Specification
Description
Type
Dual-port 16Gb mezzanine
Network processor
QLogic 8324
Data transfer method
x8 PCI express 3.0
Network transfer rate
Two ports, each at 16 Gb/s, each direction; 64 Gb/s aggregate full duplex theoretical bandwidth
IEEE compliance
802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB(LLDP), 802.1Qbg, 802.1Qbb, 802.1Qaz, 802.3ap
Standard features
  • Flexible configuration and connection of pools of compute resources

  • Performance optimized

  • Virtualization optimized

  • Supports QLogic StorFusion(TM) technology designed to enhance diagnostic and troubleshooting capabilities, quicken SAN deployment, and improve QoS when connected to Brocade 16 Gb FC fabrics

  • Power optimized

  • RAS optimized

  • Security optimized

  • Management optimized

NVIDIA Tesla M6 GPU Mezzanine Card
Specification
Description
Memory size
8Gb
Memory type
GDDR-5
Memory interface
256-bit
Card type
MXM-v3.1
I/O interface
PCIe (x16) Gen3
Max power consumption
100 W
API
DirectX 12, shader Mmodel 5.0; openGL4.5, CUDA, DirectCompute, OpenCL
Operating systems
  • Citrix XenServer 6.5 or later (Pass-through GPU)

  • VMware vSphere 5.5 or later (vDGA)

  • Microsoft Windows Server 2012 R2 (64-bit) Standard, Enterprise and DataCenter editions

NOTE:
  • Microsoft Windows Server only supported in a Citrix or VMware virtualized environment

  • Bare metal not supported at this time

top


Request Quote

Note: Please include as much details and relevant options about the item to help us match your request with an accurate price.

*Adds to cart & you can request a quote from the cart page