Please remove $0 item(s) from cart - or - Request for Quote

HPE ProLiant ML350 Gen9 CTO Tower / Rack Server

Brand:
Type:
CTO Servers
Condition:
ECS Refurbished & Tested
-PLEASE CONTACT FOR CUSTOM CONFIGURATIONS. DISK SHELVES, COMPLETE CONFIGURATIONS & TURN KEY SYSTEMS AVAILABLE.
-SPARE PARTS AVAILABLE FOR EACH MODEL. PLEASE ASK FOR PRICING ON SPARE DISK, CONTROLLERS, POWER SUPPLIES, NICs, HBAs, SFPs, Cables, etc.

Multi-Quantity Discounts Available for ALL Line Items

** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **

Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing

READ ME

  • Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
  • “Submit for Quote” items can be added to your cart and sent to us via the cart page
  • Click the blue bar to close/open a section from view after choosing your options

Server Chassiss

HPE Processors

NOTE: Up to 2 processors supported. Mixing different processor models is not supported.
Each Processor is a kit with a Heatsink and a Fan Assembly

Intel Xeon E5-2600v3

Supports up to (2) processors

Intel Xeon E5-2600v4

Supports up to (2) processors

Tower To Rack (Optional)

Here are all the items to need to convert the Tower to a Rack Server.

HPE Memory v4 (Optional)

12 DIMMs per processor (up to 24 DIMMs in a dual-processor configuration)
NOTE: LRDIMM, RDIMM are all distinct memory technologies and cannot be mixed within a server.
NOTE: Mixing of 2133 and 2400MHz DIMMs is not supported.

HPE Memory v3 (Optional)

12 DIMMs per processor (up to 24 DIMMs in a dual-processor configuration)
NOTE: LRDIMM, RDIMM are all distinct memory technologies and cannot be mixed within a server.
NOTE: Mixing of 2133 and 2400MHz DIMMs is not supported.

Drive Options (Optional)

If hard drive cage selection quantity is more than three, this X4 RPS Enablement Kit must be selected - to get proper quantity of HDD backplane power connectors.
NOTE: NVMe express bay is supported by the SFF model only. Maximum installation of NVMe express bay in ML350 Gen9 is one - installation limited to Box 1 or Box 4 for optimized cooling, which supports up to 6 SFF NVMe PCIe SSDs.
NOTE: One express bay bridge card is included in the enablement kit, with installation limited to PCIe slot 3, 6 or 8. If slot 6 or 8 is selected, a 2nd processor must be installed.

HPE LFF SAS Drives (3.5in) (Optional)

Supports up to (24) Drives

HPE LFF SATA Drives (3.5in) (Optional)

Supports up to (24) Drives

HPE SFF SAS Drives (2.5in) (Optional)

Supports up to (48) Drives

HPE SFF SATA Drives (2.5in) (Optional)

Supports up to (48) Drives

HPE SFF NVMe Drives (2.5in) (Optional)

Supports up to (6) Drives

M.2 Drives (Optional)

Must Select a drive with the Riser and not just the M.2 Drives if you dont already have the riser.
The M.2 enablement board is only supported in PCIe slot 1
NOTE: M.2 SSD ML-DL Enablmt Kit CANNOT support RAID setting when AROC card (P440ar or H240ar) is selected. Embedded B140i controller CANNOT be used when AROC is ordered.

Networking Adapters (Optional)

Storage Controller (Optional)

NOTE: The embedded B140i controller will be used as the primary controller if no controller has been selected from the list below. Embedded SATA controller can support up to 8 SATA hard drives.
NOTE: Smart Array controllers are not supported in PCIe slot 5.
For details SAS Expander instructions. Please read \"Lets's Talk SAS\" In the product description.

GPU (Optional)

NOTE: If DW GPU card selection quantity is more than two, this X4 RPS Enablement Kit MUST be selected - in order to get proper quantity of GPU external power connectors.
NOTE: A second processor must be installed if the Express bay bridge card is installed in PCIe slot 6 or 8.
NOTE: One Graphic Card Support Kit- 726565-B21 is required for each computation or graphics accelerator except for K2200 or M2000.

Cable Kits (Optional)

Please View each Cable kit to see what cables come with it.

Optical Drives (Optional)

USBs (Optional)

Intergrated Lights-Out Server Management (Optional)

iLO Management (standard), Intelligent Provisioning (standard)

Trust Platform Module (TPM) (Optional)

Cooling Fans (Optional)

NOTE: Fan Redundancy is standard in performance model. ML350 Gen9 Redundant Fan option kit (725878-B21) consists of four system fans and two PCIe air baffles.

Power Supply Unit (PSU)

NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the same input voltage, output rating, and efficiency rating.
NOTE: If more than quantity two of 800W or 1400W Power Supplies are ordered, then X4 Redundant Power Supply FIO Kit must be selected. This kit does not support the 500W Power Supply.
Minimum Power Supply quantity selection to configure with X4 RPS Enablement Kit is three.

ECS Warranty

Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing

Refurbished HPE ML350 Gen9 Configure to Order Rack Tower Server

The ML350 Gen9 is the 2P premium server which delivers a class-leading combination of performance, availability, expandability, manageability, reliability and serviceability making it the choice for remote offices, growing businesses and data centers.

Specs:

  • Tower or Rack (5U)
  • Up to (2) E5-2600 v3 or v4 Intel Xeon Processors
  • Up to (3) Fans for 1 CPU or (6) for redundancy
  • Up to (4) Fans for 2 CPU or (8) for redundancy
  • Up to (4) redundant hot-plug power supplies
  • Up to (24) DDR4 Dimms (12 per processor)
  • 9 PCI-e 3.0 Slots - Nine total expansion slots. Three PCIe 3.0 x16 (x16 speed); One PCIe 3.0 x16 (x8 speed); Four PCIe 3.0 x8 (x4 speed); One PCIe 2.0 x8 (x4 speed).

Drive capacities:

  • Hot Plug LFF SAS 288TB 24 x 12TB
  • Hot Plug LFF SATA 288TB 24 x 12TB
  • Hot Plug LFF SAS SSD 38.4TB 24 x 1.6TB
  • Hot Plug LFF SATA SSD 92.16TB 24 x 3.84TB
  • Hot Plug SFF SAS 96TB 48 x 2TB
  • Hot Plug SFF SATA 96TB 48 x 2TB
  • Hot Plug SFF SAS SSD 184.32TB 48 x 3.84TB
  • Hot Plug SFF SATA SSD 184.32TB 48 x 3.84TB
  • Hot Plug SFF NVMe PCIe SSD 7.2TB 6 x 1.2TB

Performance with Unmatched Capacity and Reliability

The HPE ProLiant ML350 Gen9 Server supports up to (2) Intel Xeon E5-2600 v3 or v4 processors offering improved performance.

HPE Smart Array Controllers are designed to increase 12 Gb/s performance, data availability and storage capacity while providing the flexibility in choice of solutions that are simple to manage.

Up to (24) DIMM slots to support HPE DDR4 SmartMemory 2400MHz, helping to prevent data loss and downtime with enhanced error handling while improving workload performance and power efficiency.

Know your Server - CTO Configuration Support

Need help with the configuration? Contact us today!

Tower-to-Rack Conversion
Converting the Tower to a Rack server is somewhat straightforward for detailed information please read the Tech Manual below. Below is a list of parts that are needed for the rack conversion to go over well.

  • HP Security Bezel Kit - 660584-B21
  • HP ML350 Gen9 Tower to Rack Conversion Kit - 726567-B21
    • 5U rail kit,
    • Cable management arm (CMA)
    • Rack enablement kit (rack ear, rack handle, SID blank etc)

1 Socket to 2 Socket Configurations.
The big difference between a 1-socket and 2-socket configuration is cooling. In a 1 Socket configuration, there are 3 fans and 1 blank in the Fan cage. This system allows redundant fan configuration for better airflow. The Fan cage can hold 8 fans for a redundant 2-socket configuration. To install the redundant fans you’ll need the HP ML350 Gen9 Redundant Fan Kit
(725878-B21). This kit consists of four system fans and two PCIe air baffles. View the images above for fan numbering and placement.

Drives and Configurations
This ML350 Tower Server can handle either LFF or SFF, SAS, or SATA Drives. You can’t mix LFF and SFF but you can mix SAS and SATA. If RAID is installed the SAS drives will be the only drives in the RAID. This System can also hold up to 6 NVMe SSD drives only on the SFF Chassis. You will need to install the HP ML350 Gen9 NVMe 6 Solid State Drive Express Bay Enablement Kit (726551-B21). Which comes with the Drive Cage and Express Bay Bridge card.

Each chassis comes with 1 Drive cage installed, for extra drive cages you will need to install the following. If you have the LFF Chassis, you’ll need the HP ML350 Gen9 8LFF Hot Plug Drive Cage Kit (726547-B21). If you have the SFF Chassis, you’ll need the HP ML350 Gen9 8SFF Hard Drive Cage Kit (778157-B21). If you do not fill the entire drive cage, you’ll need Blanks to keep the airflow correct. Here we have the HPE Large Form Factor Hard Drive Blank Kit (666986-B21) and the HPE Small Form Factor Hard Drive Blank Kit (666987-B21).

Inside the ML350 Tower Server, you have the option to place the HPE Universal SATA HHHL M.2 Kit (878783-B21) in PCI-e Slot 1. The M.2 SSD ML-DL Enablement Kit can be used to build RAID 0, 1 by using the B140i controller. Unless you have the P440ar or H240ar installed then the enablement kit cannot support RAID nor can the B140i controller be used.

Let’s talk SAS
There are a few ways to add SAS drives to the system. It depends on the amount of SAS drives you need. If you only want 8 SAS drives and want to save a PCI slot. Then I recommend the Flexible Smart Array Controller (AROC) cards. The HPE Flexible Smart Array P440ar/2GB FBWC 12Gb 2-ports Int SAS Controller (726736-B21) comes with an HPE Smart Storage Battery. You could also use the HPE H240ar 12Gb 2-ports Int Smart Host Bus Adapter (726757-B21). Both are installed on the system board without using a PCIe slot. You can also use this HP Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller (726821-B21) but it will consume 1 PCIe Slot.

For up to 24 SAS Drives use the HP 12Gb SAS Expander Card for ML350 Gen9 (769635-B21). The SAS Expander card must be used in conjunction with an HPE Smart Array P440 or P840 controller, or an H240 Host Bus Adapter. The SAS Expander card cannot be connected to H240ar or P440ar Flexible Smart Array Controller (AROC) cards. The SAS Expander kit includes two cables to connect from the Smart Array controller or HBA to the SAS Expander and the other to connect from the Expander to the HDD backplane.

For up to 48 SAS Drives you’ll need the second SAS Expander card. The HP ML350 Gen9 2nd Expander Card (811216-B21) must be used in conjunction with the ML350 Gen9 SAS Expander kit (769635-B21) above. Along with 2 CPUs, a redundant PSU’s kit (802988-B21), and the HP Smart Array P840/4GB FBWC 12Gb 2-ports Int SAS Controller (761874-B21).

You can find all the cabling guides in the tech manual.

HPE Computation and Graphics Accelerators
One Graphic Card Support Kit - (726565-B21) is required for each computation or graphics accelerator except for K2200 or M2000. Below is the list of GPU’s, you can have up to 4.

  • HP AMD FirePro W7100 Accelerator Kit (J0H10A)
  • NVIDIA Tesla K40C 12GB Computational Accelerator (753960-B21). If this is selected you will need the redundant PSU kit (725870-B21) with at least 3 800W PSU’s.

The following are only allowed on the E5-2600v4 Processors.

  • HPE NVIDIA Quadro M4000 Graphics Accelerator (M9X58A)
  • HP NVIDIA Quadro M5000 Graphics Accelerator (M9R60A)
  • HPE NVIDIA Quadro M2000 Graphics Accelerator (P8Y48A)
  • HPE NVIDIA Quadro P2000 Graphics Accelerator (Q0V77A)
  • HPE NVIDIA Quadro P4000 Graphics Accelerator (Q0V78A)


NOTE:
If more than two Double Wide Graphics options are selected, then HPE ML350 Gen9 X4 RPS Enablement Kit must be selected in order to get the third and fourth supporting power connectors to supply power to the GPU cards.

Flex Power Supply Unit (PSU) Support
If you need more than 2 PSU’s you will need to install the HP ML350 Gen9 X4 Redundant Power Supply Enablement (RPS) FIO Kit
(725870-B21). This kit does not support the 500W Power Supply. If you’re not sure about the power supply please contact us today for support on the CTO.

 

Current Configuration

Server Chassiss

HPE Processors

Tower To Rack (Optional)

HPE Memory v4 (Optional)

HPE Memory v3 (Optional)

Drive Options (Optional)

HPE LFF SAS Drives (3.5in) (Optional)

HPE LFF SATA Drives (3.5in) (Optional)

HPE SFF SAS Drives (2.5in) (Optional)

HPE SFF SATA Drives (2.5in) (Optional)

HPE SFF NVMe Drives (2.5in) (Optional)

M.2 Drives (Optional)

Networking Adapters (Optional)

Storage Controller (Optional)

GPU (Optional)

Cable Kits (Optional)

Optical Drives (Optional)

USBs (Optional)

Intergrated Lights-Out Server Management (Optional)

Trust Platform Module (TPM) (Optional)

Cooling Fans (Optional)

Power Supply Unit (PSU)

ECS Warranty

*list also serves as quick links to each section

Welcome to the Request Express Quoting Form!

for: HPE ProLiant ML350 Gen9 CTO Tower / Rack Server


This streamlined form is designed to simplify the quoting process for you. Whether you're uncertain about specific parts or seeking a hassle-free experience, you're in the right place.

Provide us with the necessary details, and we'll generate a customized quote for your server. Even if you're unsure about the exact components you need, we've got you covered. Our team will tailor a solution based on the information you provide.

Let's get started!
Simply fill out the form, and we'll take care of the rest.


Name *
Email *
Message *
Preferred Brand
Form Factor
Rack Unit of Height (#U)
Processor(s)
Memory
Total Amount of Memory
Total Amount of Usable Storage

Storage Type


RAID

List Networking Connection needed:
Rack Space Restrictions
Which OS do you plan on using:


Price as Configured: 0

Add to Cart

Error Submitting Cart. Please get in touch with us for support.

Please select all the mandatory items in the configuration list before submitting the cart.

One or more items in your cart has no price. This will be submitted as a "Request for a Quote".

Product Specs

Base Standard Capabilities

Product features

Feature
Description
Processor
(One of the following depending on model)
Model
CPU Frequency
Cores
L3 Cache
Power
QPI
DDR4 Hz
E5-2699v3
2.3 GHz
18
45MB
145 W
9.6 GT/s
2133
E5-2698v3
2.3 GHz
16
40MB
135 W
9.6 GT/s
2133
E5-2697v3
2.6 GHz
14
35MB
145 W
9.6 GT/s
2133
E5-2695v3
2.3 GHz
14
35MB
120 W
9.6 GT/s
2133
E5-2690v3
2.6 GHz
12
30MB
135 W
9.6 GT/s
2133
E5-2683v3
2.0 GHz
14
35MB
120 W
9.6 GT/s
2133
E5-2680v3
2.5 GHz
12
30MB
120 W
9.6 GT/s
2133
E5-2670v3
2.3 GHz
12
30MB
120 W
9.6 GT/s
2133
E5-2667v3
3.2 GHz
8
25MB
135 W
9.6 GT/s
2133
E5-2660v3
2.6 GHz
10
25MB
105 W
9.6 GT/s
2133
E5-2650v3
2.3 GHz
10
25MB
105 W
9.6 GT/s
2133
E5-2650Lv3
1.8 GHz
12
25MB
65 W
9.6 GT/s
2133
E5-2643v3
3.4 GHz
6
20MB
135 W
9.6 GT/s
2133
E5-2640v3
2.6 GHz
8
20MB
90 W
8.0 GT/s
1866
E5-2630v3
2.4 GHz
8
20MB
85 W
8.0 GT/s
1866
E5-2630Lv3
1.8 GHz
8
25MB
55 W
8.0 GT/s
1866
E5-2620v3
2.4 GHz
6
15MB
85 W
8.0 GT/s
1866
E5-2609v3
1.9 GHz
6
15MB
85 W
8.0 GT/s
1600
E5-2603v3
1.6 GHz
6
15MB
85 W
6.4 GT/s
1600
E5-2699v4
2.2 GHz
22
55MB
145 W
9.6 GT/s
2400
E5-2698v4
2.2 GHz
20
50MB
135 W
9.6 GT/s
2400
E5-2697v4
2.3 GHz
18
45MB
145 W
9.6 GT/s
2400
E5-2697Av4
2.6 GHz
16
40MB
145 W
9.6 GT/s
2400
E5-2695v4
2.1 GHz
18
45MB
120 W
9.6 GT/s
2400
E5-2690v4
2.6 GHz
14
35MB
135 W
9.6 GT/s
2400
E5-2683v4
2.1 GHz
16
40MB
120 W
9.6 GT/s
2400
E5-2680v4
2.4 GHz
14
35MB
120 W
9.6 GT/s
2400
E5-2667v4
3.2 GHz
8
25MB
135 W
9.6 GT/s
2400
E5-2660v4
2.0 GHz
14
35MB
105 W
9.6 GT/s
2400
E5-2650v4
2.2 GHz
12
30MB
105 W
9.6 GT/s
2400
E5-2650Lv4
1.7 GHz
14
35MB
65 W
9.6 GT/s
2400
E5-2643v4
3.4 GHz
6
20MB
135 W
9.6 GT/s
2133
E5-2640v4
2.4 GHz
10
25MB
90 W
8.0 GT/s
2400
E5-2637v4
3.5 GHz
4
15MB
135 W
9.6 GT/s
2400
E5-2630v4
2.2 GHz
10
25MB
85 W
8.0 GT/s
2133
E5-2630Lv4
1.8 GHz
10
25MB
55 W
8.0 GT/s
2133
E5-2623v4
2.6 GHz
4
10MB
85 W
8.0 GT/s
2133
E5-2620v4
2.1 GHz
8
20MB
85 W
8.0 GT/s
2133
E5-2609v4
1.7 GHz
8
20MB
85 W
6.4 GT/s
1866
E5-2603v4
1.7 GHz
6
15MB
85 W
6.4 GT/s
1866
Chipset
  • Intel C610 series chipset

  • Intel E5-2600v3 processor family

  • Intel E5-2600v4 processor family


On system management chipset 1
HPE iLO (Firmware HPE iLO4 2.0 or later)) 4GB NAND1
Memory 2
(One of the following depending on model)
Type: HPE SmartMemory DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)
Support with E5-2600v3 processors
Dual In-Line Memory Module (DIMM) slots available
24 (12 DIMM Slots per processor, 4 channels per processor, 3 DIMMs per channel)
Maximum capacity (LRDIMM)
1.5TB (24 x 64GB)
Maximum capacity (RDIMM)
768GB (24 x 32GB)
Support with E5-2600v4 processors
DIMM Slots available
24 (12 DIMM Slots per processor, 4 channels per processor, 3 DIMMs per channel)
Maximum capacity (LRDIMM)
3TB (24 x 128GB)
Maximum capacity (RDIMM)
768GB (24 x 32GB)
Memory protection
Advanced ECC
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.
Online spare
Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.
Network controller
HPE 1 GbE 4-port 331i Adapter

Specs 1

Expansion slots 3
Expansion slots
Technology
Bus width
Connector width
Bus number
Form factor
Notes
9
PCIe 3.0
x 4
x 8
-
Full length/Full height
For processor 2
8
PCIe 3.0
x 16
x 16
-
Full length/Full height
For processor 2
7
PCIe 3.0
x 4
x 8
-
Full length/Full height
For processor 2
6
PCIe 3.0
x 16
x 16
-
Full length/Full height
For processor 2
5
PCIe 2.0
x 4
x 8
-
Full length, half height slot
For processor 2
4
PCIe 3.0
x 4
x 8
0
Full length/Full height
For processor 1
3
PCIe 3.0
x 16
x 16
0
Full length/Full height
For processor 1
2
PCIe 3.0
x 4
x 8
0
Full length/Full height
For processor 1
1
PCIe 3.0
x 8
x 16
0
Full length/Full height
For processor 1
Storage controller
(One of the following depending on model)
Entry models
HPE Dynamic Smart Array B140i embedded SATA controller
Base models
HPE Flexible Smart Array P440ar/2GB
Performance models
HPE Flexible Smart Array P440ar/2GB
Internal storage devices
(One of the following depending on model)
Optical drive4
Optional SATA 9.5 mm DVD-ROM optical Drive
Optional SATA 9.5 mm DVD-RW optical Drive
Hard drive
None ship standard
Hard drive bays5
(8) Hot-Plug Small Form Factor (SFF) SAS/SATA Hard Disk Drive (HDD) bays, upgradable to (48)
(8) Hot-Plug Large Form Factor (LFF) SAS/SATA HDD bays, upgradable to (24)
Maximum internal storage
(One of the following depending on model)

Cpacity
Configuration
Hot-Plug LFF SAS
288TB
24 x 12TB
Hot-Plug LFF SATA
288TB
24 x 12TB
Hot-Plug LFF SAS Solid State Drive (SSD)
38.4TB
24 x 1.6TB
Hot-Plug LFF SATA SSD
92.16TB
24 x 3.84TB
Hot-Plug SFF SAS
96TB
48 x 2TB
Hot-Plug SFF SATA
96TB
48 x 2TB
Hot-Plug SFF SAS SSD
184.32TB
48 x 3.84TB
Hot-Plug SFF SATA SSD
184.32TB
48 x 3.84TB
Hot-Plug SFF NVMe PCIe SSD
7.2TB
6 x 1.2TB
Power supply
(One of the following depending on model)
  • HPE 500 W Flexible slot platinum hot-plug power supply6

  • HPE 800 W Flexible slot platinum hot-plug power supply

  • HPE 1400 W Flexible slot platinum plus hot-plug power supply

System fans
(One of the following depending on model)
Model
Non-Redundant
Redundant
1P Model7
3 Fans
6 Fans
2P Model8
4 Fans
8 Fans
Interfaces
Serial
1
Video
1 (Rear)
Network RJ45 (Ethernet)
4
HPE iLO Remote management network port
1Gb Dedicated
SD Slot9
1 (Internal)
USB 2.0 Ports
5 (2 Front, 2 rear, 1 internal)
USB 3.0
3 (2 Rear, 1 internal)
Upgradeability
  • Upgradable for 2 processors (Up to 22 cores)10

  • Up to 24 DIMM slots available for higher Memory capacity

  • Up to 48 SFF or 24 LFF hard drive bays

  • Up to 6 SFF NVMe PCIe SSD drives11

  • 8 PCIe 3.0 and 1 PCIe 2.0 I/O slots for additional communications and storage expansion

  • 4 redundant hot-plug power supplies

  • Redundant Fan

  • Optional optical drive (Up to 1)12

  • Optional SFF or LFF media bay kit to support RDX or tape device(s)

  • Tower to rack conversion

  • Optional system insight display13

Industry standard compliance
  • ACPI 2.0b Compliant

  • PCIe 3.0 Compliant

  • PXE Support

  • WOL Support

  • Novell certified

  • IPMI 2.0, SMASH CLP, DCMI 1.0 compliant

  • Microsoft Logo certifications

  • USB 3.0 Support

  • SMBIOS 2.7.1

  • ASHRAE A3/A4

  • Energy star

Graphics
  • 16-bit Color: maximum resolution of 1600 x 1200

    Integrated Matrox G200 video standard

  • 32-bit Color: maximum resolution of 1280 x 1024

    • 16MB Flash

    • 256MB DDR3

Form factor
Tower or rack (5U)
HPE ServerUEFI/Legacy ROM
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
  • Secure Boot

  • Operating System (OS) specific functionality

  • Support for > 2.2TB (Using GPT) boot drives

  • USB 3.0 Stack

  • Embedded UEFI Shell

  • Mass configuration deployment tool using RESTful API for iLO 4

  • PXE Boot support for IPv6 networks

  • Boot support for option cards that only support a UEFI option ROM

  • Network stack configurations

Embedded management
  • HPE Integrated Lights-Out (HPE iLO)

  • Unified Extensible Firmware Interface (UEFI)

  • RESTful API

  • Intelligent Provisioning

  • Embedded remote support

Server utilities
  • Smart update

  • HPE Systems Insight Manager (HPE SIM)

  • Scripting tool kit and Windows PowerShell

  • RESTful interface tool

  • HPE iLO Mobile application

  • HPE Insight online

Security
  • Power-On password

  • Setup password

  • Serial interface control

  • Power switch security

  • Administrator's password

  • Trusted Platform Module (TPM) 2.0

  • TPM 1.2

  • UEFI

  • Security front bezel

  • Chassis mechanical support of padlock and Kensington Security lock (Located at system rear)

NOTE:
  1. 1GB USB user space configurable via UEFI and accessible via iLO
  2. Mixing of 2133 and 2400 MHz memory is not supported

    • Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number
    • Nine total expansion slots, three PCIe 3.0 x 16 (x 16 speed); One PCIe 3.0 x 16 (x 8 speed), Four PCIe 3.0 x 8 (x 4 Speed); One PCIe 2.0 x 8 (x 4 Speed)
  3. Optical is optional in entry, base and performance BTO models
  4. All Pre-configured Models come populated with some hard drive blanks installed. Should the user need additional hard drive blanks, they can order more using either P/N 666987-B21: HPE SFF HDD Blank Kit or P/N 666986-B21: HPE LFF HDD Blank Kit. These part numbers for single HDD blanks below are also provided should the user require replacement HDD blanks for their server.
  5. The 500 W Flex slot PSU was not qualified or supported with the X4 RPS enablement kit
  6. Fan redundancy is standard in performance model. ML350 Gen9 Redundant Fan option kit (725878-B21) consists of four system fans and two PCIe air baffles
  7. Refer to ML350 Gen9 User Guide for fan configuration rules
  8. The Micro-SD slot is not a hot-pluggable device. User should not attempt to plug a Micro-SD card into the Micro-SD slot while the server is powered
  9. Total 4, 6, 8, 10, 12, 14, 16, 18, 20 & 22 cores
  10. The ML350 Gen9 6SFF Express Bay kit MUST be installed and it takes up one SFF drive cage space.
  11. Support of 9.5 mm DVD-RW or DVD-ROM
  12. Rack model only

top

Specs 2

Software overview

Feature
Description
OS and virtualization software support for ProLiant servers
  • Microsoft Windows Server

  • Canonical Ubuntu

  • Red Hat Enterprise Linux (RHEL)

  • SUSE Linux Enterprise Server (SLES)

  • VMware

  • Citrix XenServer

  • ClearOS

NOTE:
  • ClearOS allows the user to build a fully functional server that is just right for the user at no upfront cost. It is available via CTO preload, Intelligent Provisioning or via download.
  • For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for server.

top

Physical specifications

Specification
Description
Tower dimensions
46.4 x 21.9 x 76.9 cm (18.27 x 8.62 x 30.28 in)
Rack dimensions
21.8 x 44.5 x 74.6 cm (8.58 x 17.51 x 29.37 in)
Tower weight
Minimum: 30 kg (66.14 lb)
Maximum: 55 kg (121.30 lb)
Rack weight
Minimum: 26 kg (57.3 lb)
Maximum: 51 kg (112.4 lb)

top

Electrical specifications

Specification
Description
Range line voltage
  • 100 to 120 V ac

  • 200 to 240 V ac

Maximum BTU rating
  • For 800 W Power Supply: 3207 BTU/hr (at 100 V ac), 3071 BTU/hr (at 200 V ac), 3112 BTU/hr (at 240 V ac) for China Only

  • For 500 W Power Supply: 1979 BTU/hr (at 100 V ac), 1911 BTU/hr (at 200 V ac), 1965 BTU/hr (at 240 V ac) for China Only

Rated Steady- State power
  • For 800 W Power Supply: 800 W (at 100 V ac), 800 W (at 240 V ac), 800W (at 240 V ac) input for China only

  • For 500 W Power Supply: 500 W (at 100 V ac), 500 W (at 240 V ac), 500W (at 240 V ac) input for China only

Maximum peak power
  • For 800 W Power Supply: 800 W (at 100 to 127 V ac), 800 W (at 200 to 240 1V ac), 800W (at 240 V ac) input for China only

  • For 500 W Power Supply: 500 W (at 100 to 127 V ac), 500 W (at 200 to 240 V ac), 500W (at 240 V ac) input for China only

top

Environmental specifications

Specification
Description
Operating temperature
10° to 35°C (50° to 95°F)
Non-operating temperature
-30° to 60°C (-22° to 140°F)
Operating relative humidity
8% to 90%
Non-operating relative humidity
5% to 95%, non-condensing
Operating altitude
3050 m (10,000 ft)
Non-operating altitude
9144 m (30,000 ft)

top

Safety certifications

Specification
Description
FCC Rating
Class A
Normative standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES- 003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000- 3-3; EN 60950-1; IEC 60950-1

top

Shipping Information

Express Computer Systems can ship to virtually any address in the world and provides you with the best shipping rates possible. Cost of shipping varies depending on what service you require, your destination and size of the shipment. Shipping costs will be calculated separately from your order and billed to you post purchase. In the notes section of your order please provide us with your preferred shipping method and we will get back to you.

Custom configured orders ship within 2 business days after all required products are in stock.

Please allow 3 business days for products that are not in stock to arrive to our facility in Irvine, California.

Domestic Shipments
  • Standard Ground
    • Shipping time: 2-7 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-10 business days
    • Excludes weekends, holidays or weather delays.
  • 3 Business Days
    • Shipping time: 3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 3-6 business days
    • Excludes weekends, holidays or weather delays.
  • 2 Business Days
    • Shipping time: 2 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-5 business days
    • Excludes weekends, holidays or weather delays.
  • Overnight / Next Business Day
    • Shipping time: 1 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 1-4 business days
    • Excludes weekends, holidays or weather delays.
International Shipments
  • International Economy
    • Shipping time: 4-6 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 5-9 business days
    • Excludes weekends, holidays or weather delays.
  • International Priority
    • Shipping time: 1-3 business days
    • Order processing time: 0-3 business days
    • Delivery time after order is placed: 2-6 business days
    • Excludes weekends, holidays or weather delays.

For more information on shipping view our Shipping Information page or send us a message

ECS Warranty Information

Express Computer Systems (ECS) provides a 1 year parts warranty against defects in material or workmanship that will affect the products functionality. All refurbished items are tested prior to shipping to guarantee up-time upon arrival. If you are having issues with an item we provided please Contact Us and we will do our best to assist you.

What does our ECS warranty cover?
We offer 1 year warranty as standard and additional years can be added to fit your needs. Please reach out to a sales associate via the Contact Us page or live chat for more information on extended coverage options. During the coverage period if your product fails we will offer a Next Business Day replacement. If we are unable to replace the product we will refund its original selling price. Shipping costs and tax are not refundable. Express Computer Systems retains the right to decide whether the goods will be replaced or refunded.

What is not covered by our warranty?
Our warranty does not cover any problem caused by the following conditions:

  1. accidents; misuse; carelessness; electrostatic discharge; shock; temperature or humidity beyond the specifications of the product; improper installation; operation; modification;
  2. any improper use that contravenes the instructions in the user manual;
  3. problems caused by other equipment. Our warranty is void if the product is returned with damaged, removed, counterfeit labels, or any modifications (including any component or external cover removal). Our warranties do not cover data loss or damages to any other equipment. In addition, our warranties do not cover incidental damages, consequential damages, or costs related to data recovery, removal, and installation.

Important notes:

  • Please ask for additional warranty/coverage that you may require in addition to the standard 1 ECS warranty prior to final purchase. Requesting additional warranty after your purchase can be denied.
  • FREE technical support is provided on purchased items via phone, email, or live chat.

About Express Computer Systems

Express Computer Systems is committed to transforming our customers’ IT infrastructure with high quality products at affordable costs. Our sales reps and customer support engineers understand our customers rely heavily on advanced technology to run their business but need to do so without breaking the bank.

We specialize in building custom server configurations, custom storage solutions, networking solutions, and components from top manufacturers including HPE, Dell, Cisco, NetApp, Dell EMC, HPE Nimble and many others.

Subscribe