Your Cart is Empty
The HPE ProLiant ML30 Gen9 server is an affordable single-socket tower server that features value performance, expansion, and growth that is ideal for small businesses and remote branch offices.
The HPE ProLiant ML30 Gen9 server offers HPE iLO Management, a complete set of embedded features, standard on all ProLiant Gen9 Server products. Includes HPE iLO with Agentless Management, Active Health System, Intelligent Provisioning, and Embedded Remote Support.
HPE Insight Control provides advanced management capabilities across the lifecycle of your HPE ProLiant server infrastructure. HPE iLO Advanced, a key component, provides enhanced remote server functions that reduce IT travel costs, while decreasing time-to-resolution.
HPE Insight Online with Insight Remote Support provides 24x7 remote monitoring and anywhere, anytime personalized access to your IT and support status.
HPE Smart Update Solution reduces deployment time and update complexity by systematically updating server infrastructure in the data center. Includes Smart Update Manager (SUM), and Service Pack for ProLiant (SPP), and other products.
ML30 Gen9 front-back
The HPE ProLiant ML30 Gen9 server Smart Array options provide businesses RAID mirroring and striping capability to protect critical data while the Flash-Backed Write Cache (FBWC) captures and holds data indefinitely in the event of a power loss, equipment failure, human error or virus attacks.
HPE Smart Drives improve serviceability and prevents data loss with features such as icon-based status display and Do Not Remove LED.
ECC memory protects businesses from data loss and unplanned system downtime.
The HPE ProLiant ML30 Gen9 server provides HPE SmartDrives which offers more drive options including eight Small Form Factor (SFF) and four Large Form Factor (LFF) drive cages giving you flexibility for increased capacity for your local storage. Support up to 8 TB per slot.
It supports 2400 MHz DDR4 memory, with up to four DIMMs (64 GB maximum) for increased performance.
Four PCI Express (PCIe) slots, including four PCIe 3.0 slots, provide additional I/O performance.
The HPE ProLiant ML30 Gen9 server offers compatibility with 24-port HPE 1810 Series Switches to enhance both connectivity and data availability.
Common pool of resources and applications results in a higher level of simplicity and flexibility in operations.
User-friendly interface on HPE PS1810 Series Switches allow for a consolidated view of servers and switches in the network so workloads can be prioritized.
Processor (One of the following depending on model)
Cache memory (One of the following depending on model)
Intel C236 chipset
On system management chipset
HPE iLO (Firmware HPE iLO4 2.0) 4GB NAND
HPE Ethernet 1Gb 2-port NC332i adapter
NOTE: Bus width indicates the number of physical electrical lanes running to the connector
Storage controller (One of the following depending on model)
NOTE: B140i can not mix with any standup internal controller
Internal storage devices (One of the following depending on model)
Maximum internal storage
Industry standard compliance
Integrated Matrox G200 video standard
HPE iLO 4 on system management memory
HPE NVIDIA Quadro M2000 GPU Module
Micro ATX Tower (4U) chassis with feet/bezel:
8 SFF drive bay cage:
4 LFF drive bay cage:
HPE Server UEFI / legacy ROM
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
Operating systems and virtualization software support
Dimensions (H x W x D):
36.82 x 17.5 x 47.52 cm (14.50 x 6.89 x 18.7 in)
Rated line voltage
100 - 120 V ac
Rated input current
2.5 - 6 A
Rated input frequency
47 - 63 Hz
Rated input power
460 W - 1773 BTU/hr (At 120 V ac), 1715 (At 240 V ac)
Rated steady-state power
10°C to 35°C (50°F to 95°F)
-30°C to 60°C (-22°F to 140°F)
Operating relative humidity
10% to 90% non-condensing
Non-operating relative humidity
5% to 95% non-condensing
3048 m (10,000 ft)
9144 m (30,000 ft)
Emissions Classificatio (EMC)
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003;CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3;EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on sample (Type) testing, evaluation or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.