Multi-Quantity Discounts Available for ALL Line Items
** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **
Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing
READ ME
- Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
- “Submit for Quote” items can be added to your cart and sent to us via the cart page
- Click the blue bar to close/open a section from view after choosing your options
Server Chassis
One system board for all Processors (847393-001)
NHPE server chassis includes SATA cables required to connect drives to embedded B140i SATA controller.
Intel Processors
Mixing different processor models is not supported.
The correct amount of fans will be installed for the amount of Processors you choose.
If you desire a redundant fan condifuration, please select the kit in the cooling section below.
Intel Xeon E5-2600v3
Supports (2) Processors
Each Processor comes with 2 Fans.
Intel Xeon E5-2600v4
Supports (2) Processors
Each Processor comes with 2 Fans.
Bezel (Optional)
Quick Release Ear FIO kit (P/N: 778109-B21) is required for installing security bezel.
Quick Release Ears are mandatory for the 12LFF model
Memory E5-2600v3 2133MHz (Optional)
Supports up to (4) DIMMs Per Processor
Memory types within the server cannot be mixed.
Memory E5-2600v4 2400MHz (Optional)
Supports up to (4) DIMMs Per Processor
Memory types within the server cannot be mixed.
Drive Options (Optional)
For the NHP Chassis only, Adds another 4 NHP LFF drives.
Non-Hot-Plug LFF HDD (Optional)
Supports up to (8) NHP LFF Drives with Enablement Kit
HPE LFF Drives SAS (3.5in) (Optional)
Supports up to (8) or (12) Drives depending on chassis selection
HPE LFF Drives SATA (3.5in) (Optional)
Supports up to (8) or (12) Drives depending on chassis selection
Cooling Fans (Optional)
This kit comes with 2 fans.
Each Riser comes with a Fan and each Processor comes with 2 Fans. Before you select this kit, see how many fans you need.
Max 5 for 1 Socket and 6 for a 2 Socket configuration.
PCI Riser Options (Optional)
All the riser option kits ship with necessary fan option kits.
Please read the PCI Riser section in the product description or the tech manual for more details.
M.2 (Optional)
NOTE: M.2 drives go in PCIe slot and use B140i SATA controller only.
Networking Adapters (Optional)
Network Adapters, FlexibleLOM, CNA, InfiniBand
The HPE Embedded Dual Port 361i Adapter Network Interface Comes Standard
FlexibleLOM riser kit (P/N: 765514-B21) is required when any FlexibleLOM is selected.
Please read the PCI Riser section in the product description for more details.
Host Bus Adapters (HBAs) (Optional)
H240 Provides support for up to 8 SAS/SATA drives, data transmission speeds up to 12Gb/s and supports RAID 0, 1 & 5 on DL80 Gen9.
Please read the PCI Riser section in the product description for more details
Storage Controller (Optional)
Comes with the Standard HPE Dynamic Smart Array B140i Controller
B140i provides support for up to 4 SATA drives, data transmission speeds up to 6Gb/s and supports RAID 0, 1 & 5
All Performance Controllers require the Smart Storage Battery.
GPU (Optional)
When installing a GPU you need the GPU Enablement Kit (765518-B21)
Includes 1 FHFL slot, one fan and power cable required to enable GPU support.
Optical Drives (Optional)
Server Management iLO (Optional)
iLO Management (standard)
Intelligent Provisioning (standard)
If you want to use TPM 1.2 you must have Legacy Mode UEFI FIO Setting (758959-B22)
HP AHCI-Enable FIO Setting 801845-B21 NOTE: This needs to be selected when Advanced Host Controller Interface mode is required on B140i controller.
Trust Platform Module (TPM) (Optional)
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode
Do not use the B140i controller when the server is in Legacy BIOS Boot Mode.
Power Supply Unit (PSU)
Mixing of power supplies is not supported
The RPS backplane is mandatorily needed with 900W RPS input module.
The Kit at the bottom has 2 PSU, the Cage and the Backplane.
Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing
Other Versions
(Click to View)
The DL80 Gen9 can be configured with 1 or 2 processors. The system board (847393-001) can handle both Intel Xeon E5-2600 v3 and v4 processors. The fan setup is different for each configuration with the option of the redundant fan kit as well. On the 1 Socket configuration, you have 2 non-redundant fans, or you can have 4 redundant fans. The 2-Socket fan configuration has 4 non-redundant fans but supports 6 redundant fans. When installing the second processor for a 2-socket configuration. The 2 additional fans will be included when the second processor is selected. If you want the redundant fans set up, you’ll need the redundant fans kit (765516-B21). The fan kit includes two fans and is required to move from non-redundant to redundant fan configurations. Since each riser includes a fan as well, please refer to user-guide for exact fan requirements to enable fan redundancy.
A major change in the DL80 Gen9 rack server is the ability for the processor to be upgraded from E5-2600v3 to E5-2600v4. Up to 2 processors are supported and mixing different processor models is not supported.
To Hot-Swap or not!
The system can support up to 8 LFF Non-Hot-Plug Drives with the selection of the HP DL80 Gen9 8LFF Non-hot Plug Enablement Kit (788355-B21). If you don’t fill all the drives in the desired chassis, please fill the empty slots with the HPE Large Form Factor Hard Drive Blank Kit (666986-B21) for better airflow.
Maximum Internal Storage
- Hot Plug LFF SAS 0TB 12 x 8TB
- Hot Plug LFF SATA 0TB 12 x 8TB
- Hot Plug LFF SATA SSD 08TB 12 x 3.84TB
- Non-Hot-Plug LFF SATA 32TB 8 x 4TB
The default embedded B140i controller will operate in UEFI-only mode. For legacy support, an additional controller will be needed, and select the Legacy mode settings (758959-B22).
The DL80 supports the performance Smart Arrays P440 and P840. When installing these two Performance Smart Arrays, you will need the right cabling (779619-B21) and an HPE Smart Storage Battery (727258-B21) with a retainer clip (790501-001). Both controllers use the same cable (779619-B21), the difference is the number of Ports. The P440 has 1 port, with support for 8 SAS/SATA drives, and only needs 1 cable (779619-B21), while the P840 has two ports, with support for 16 SAS/SATA drives, and needs two cables (779619-B21).
There is also support for the Host Bust Adapter H240 which has 2 internal ports supporting 8 SAS connectors. This Smart HBA will need 2 of the Smart HBA H240 SAS Cable Kits (779622-B21) if selected.
The HPE Embedded Dual Port 361i Network Adapter comes standard on the system board. It has 2 RJ45 connectors and is powered by the Intel I350 Powerville controller.
PCI Risers
Need a PCI-e Slot? This server has plenty of them, but you need to select the correct riser for more advanced cards to be supported. Although the DL80 has up to 7 PCI-e slots, two of them are dedicated as Primary and Secondary. Both the Primary and Secondary Slots can support either a Riser Card or a Stand-up Card.
In the Primary slot, you have the option of two risers to install. The GPU Riser (765518-B21) or the FL/FH Two-slot PCI Riser assembly (765515-B21). There is only one riser to install in the Secondary PCI slot, the HP DL80 Gen9 FlexibleLOM Riser Kit (765514-B21). The FlexibleLOM Riser has 2xPCI-e 3.0x8 slots. Slot 4 is a Low Profile and slot 5 is a FlexibleLOM Slot.
NOTE: To take advantage of the additional Secondary PCI slot, a second processor must be installed. All the riser option kits ship with necessary fan option kits. Please read the Tech Manual below for more details.
GPU
To install the GPU cards, you must install the GPU Riser (765518-B21) that is installed in the Primary PCI slot. The riser includes 1 FHFL slot, one fan, and the power cable required to enable GPU support. This system supports up to 1 GPU.
M.2
The M.2 PCI-e Card is an x8 PCI bus size and can be installed as a stand-up card or on a riser card. The M.2 Cards need the SSD SATA Cables for each M.2 SSD installed.
Let’s talk power!
The HPE 550W FIO Power Supply (730941-B21) offers Silver-certified 80 Plus power efficiency (up to 89%) with an optimized set of features for non-redundant power configurations. The HPE 900W AC 240VDC Power Input Module (775595-B21) with Power Backplane (814835-B21) can be configured to support power redundancy in ProLiant servers that offer only a single power supply bay, providing additional protection against power loss. To Make life easy, there is a kit that has (2) 900W PSU and the RPS power backplane (820792-B21).
Mixing of power supplies in the same server is not supported. All power supplies must be of the same input voltage, output rating, and efficiency rating.
Other Information
If you want the HPE 2U Security Bezel (666988-B21 ) installed, then you will also need to install the Quick Release Ear FIO kit (P/N: 778109-B21). Also, the Quick Release Ears are mandatory for the 12LFF model. The alternative to the Quick Release ear kit is the Thumbscrew Ear Kit (787211-B21).
Lights Out! iLO
HPE Integrated Lights-Out (HPE iLO) - Monitor your servers for ongoing management, service alerting, reporting, and remote management with HPE iLO.
