The new Dell PowerEdge R660 is a 1U, two-socket rack server. Gain the performance you need with this full-featured enterprise server, designed to optimize even the most demanding workloads like dense database analytics and high-density virtualization.
Max Performance:
- Add up to two Next Generation Intel® Xeon® Scalable processors with up to 56 cores for faster and more accurate processing performance.
- Accelerate in-memory workloads with up to 32 DDR5 RDIMMS up to 4400 MT/sec (2DPC) or 4800 MT/sec for 1DPC (16 DDR5 RDIMMs max).
- Support for GPUs including 2* x single-wide for workloads requiring acceleration.
Air-cooled at peak performance
- New Smart Flow chassis optimizes airflow to support the highest core count CPUs in an air-cooled environment within the current IT infrastructure.
- Support for up to 8 x 2.5” drives and 2 x 350 watt processors.
Cyber Resilient Architecture for Zero Trust IT environment & operations
Security is integrated into every phase of the PowerEdge lifecycle, including protected supply chain and factory-to-site integrity assurance. Silicon-based root of trust anchors end-to-end boot resilience while Multi-Factor Authentication (MFA) and role-based access controls ensure trusted operations.
Gain agility
- Achieve maximum efficiency with multiple chassis designs that are tailored to your desired workloads and business objectives.
- Storage options include up to 8 x 2.5” NVMe/SAS4/SATA, plus up to 10 x 2.5” NVMe/SAS4/SATA, 14/16 x NVME E3.S Gen5*.
- Multiple Gen4 and Gen5 riser configurations (up to 3 x PCIe slots) with interchangeable components that seamlessly integrate to address customer needs over time.
Dell PowerEdge R660 Base Knowledge
The Dell R660 is a 1U 2 Socket 32 DIMM server with 3 PCIe slots, 1 OCP, and 1 LOM. This server has 3 chassis options and supports SAS/SATA/NVMe and EDSFF drives. Below you will see more details about each chassis storage option and the drives supported.
Chassis Options
| Chassis |
Supported Configurations |
| No Drive Chassis |
Zero drives (no backplane) |
| 8SFF |
- 2.5" (NVMe)
- 2.5" (NVMe RAID)
- 2.5" (SAS4/SATA)
- 2.5" Universal
|
| 10SFF + Optional Rear 2SFF Drive |
- 2.5" (SAS4/SATA)
- 2.5" (SAS4/SATA) + 2x2.5" (SAS4/SATA)
- 2.5" (SAS4/SATA w/ 4 Universal
- 2.5" (NVMe)
- 2.5" (NVMe) + 2x2.5" (NVMe)
- 2.5" (SAS4/SATA w/ 2 Universal
|
| NOTE: The Rear drive option is only shown in the 10SFF. |
Supported Drives
| Form Factor |
Type |
Speed |
Rotational Speed |
Capacities |
| 2.5" |
vSAS |
12 Gb |
SSD |
1.92 TB, 3.84 TB, 960 GB, 7.62 TB |
| 2.5" |
SAS |
24 Gb |
SSD |
1.92 TB, 1.6 TB, 800 GB, 3.84 TB, 960 GB, 7.68 TB |
| 2.5" |
SATA |
6 Gb |
SSD |
1.92 TB, 480 GB, 960 GB, 3.84 TB |
| 2.5" |
NVMe |
Gen4 |
SSD |
1.6 TB, 3.2 TB, 6.4 TB, 1.92 TB, 3.84 TB, 15.63 TB, 7.68 TB, 800 GB, 400 GB |
| 2.5" |
DC NVMe |
Gen4 |
SSD |
3.84 TB, 960 GB |
| 2.5" |
SAS |
12 Gb |
10 K |
600 GB, 1.2 TB, 2.4 TB |
Processor | 4th Generation Intel Xeon Scalable
Up to two 4th Generation Intel Xeon Scalable processors, with up to 56 cores and optional Intel® QuickAssist Technology. 8470Q and 6458Q are supported only in liquid cooling configuration. Mixing of the processors are not recommended. If a liquid-cooled processor is installed in one socket, then the second processor used must be of the same type.
- Faster UPI with up to four Intel Ultra Path Interconnect (Intel UPI) at up to 16 GT/s, increasing multisocket bandwidth
- More, faster I/O with PCI Express 5 and up to 80 lanes (per socket)
- Enhanced Memory Performance with DDR5 support and memory speed up to 4800 MT/s in one DIMM per channel (1DPC) and 4400 MT/s in two DIMM per channel (2DPC)
- New built-in accelerators for data analytics, networking, storage, crypto, and data compression
Cooling Options
The Dell PowerEdge R660 supports Liquid Cooling and Air Cooling options.
Heatsink & Fans
The PowerEdge R660 system supports up to four sets of standard (STD) cooling fans or four sets of High-performance gold (HPR GOLD) cooling fans. The fan's selection is based on the TDP of the processor.
If rear drives are installed in the 10SFF Chassis you will need Gold Fans.
If you have a processor over 185W TDP then you will need the Direct Liquid Cooling Module installed.
For more information about cooling please refer to the installation manual of the R660.
Air Shroud
This system has a few cooling shrouds for specific configurations. All air-cooling configurations require a CPU shroud. You must Install a PCH shroud for no riser configuration.
The Rear drive shroud is needed for air-cooling with 2x 2.5-inch rear-drive configuration.
If you plan to install an A2 GPU, you will need to install the blank on R1p riser for correct airflow.
Memory Options
32 DDR5 DIMM slots, supports RDIMM 8TB max, speeds up to 4800 MT/s
Supports registered ECC DDR5 DIMMs only.
| DIMM type |
Rank |
Capacity |
DIMM rated voltage and speed |
Operating Speed |
| 1 DIMM per channel (DPC) |
2 DIMMs per channel (DPC) |
| RDIMM |
1 R |
16 GB |
DDR5 (1.1 V), 4800 MT/s |
4800 MT/s |
4400 MT/s |
| 2 R |
32 GB, 64 GB |
DDR5 (1.1 V), 4800 MT/s |
4800 MT/s |
4400 MT/s |
| 4 R |
128 GB |
DDR5 (1.1 V), 4800 MT/s |
4800 MT/s |
4400 MT/s |
| 5 R |
256 GB |
DDR5 (1.1 V), 4800 MT/s |
4800 MT/s |
4400 MT/s |
NOTE: If you are removing the memory module permanently, install a memory module blank if TDP >=250W. The procedure to install a memory module blank is similar to that of the memory module.
PCIe Riser Configuration Options
The PowerEdge R660 have a no riser option. If no risers are installed you will need to make sure the PCH Air Shroud is installed for the correct air flow.
| PCIe Riser Configuration No. |
Riser configuration |
No. of Processors |
PERC type supported |
Rear Storage Possible |
| Config 0. |
No RSR |
2 |
Front PERC |
No |
| Config 1. 3 x LP (Gen4) |
R2A+R3A |
2 |
Front PERC / PERC Adapter |
No |
| Config 2. 3 x LP (2x LP Gen5 + 1x LP Gen4) |
R2P+R3P |
2 |
Front PERC |
No |
| Config 3. 2 x 16 FH (Gen5) |
R1P+R4P |
2 |
Front PERC / PERC Adapter |
No |
| Config 4. 3 x LP (2x LP Gen5 + 1x LP Gen4) |
R2R+R3R |
1 |
N/A |
No |
| Config 5. 3 x LP (2x LP Gen4 + 1x LP SANPI Gen5) |
R2A+R3Q |
2 |
Front PERC / PERC Adapter |
No |
| Config 6. 1 |
R2Q (non A2) |
2 |
Front PERC |
No |
| Config 6. 2 x LP (Gen5) |
R2Q (only for A2) |
2 |
Front PERC |
No |
| Config 7. 1 x16 LP (Gen5) |
R3P |
2 |
Front PERC |
No |
| Config 8. 1 x LP (Gen4) |
R2A |
1 |
Front PERC / PERC Adapter |
No |
| Config 9. 2 x 16 LP (Gen5) |
R2S + R3S
|
2 |
N/A |
No |
GPU
With 3 PCIe slots on the back of the server, you have the ability to fill all 3 PCIe slots with 1 Single Wide 75W GPU. If you plan to install the A2 GPU there is a special Air shroud for it. Install A2 blank on R1p riser for FH riser configuration with A2 GPU. Only the Risers with a P on them hold GPUs.
Networking Adapters
The PowerEdge R660 system supports up to two Network Interface Controller (NIC) ports embedded on the LAN on Motherboard (LOM) card and up to four ports integrated on the Open Compute Project (OCP) card.
The system allows either LOM card or an OCP card or both to be installed in the system.
Storage Controllers
Dell RAID controller options offer performance improvements, including the fPERC solution. fPERC provides a base RAID HW controller without consuming a PCIe slot by using a small form factor and high-density connector to the base planar.
16G PERC Controller offerings are a heavy leverage of 15G PERC family. The Value and Value Performance levels carry over to 16G from 15G. New to 16G is the Avenger-based Premium Performance tier offering. This high-end offering drives IOPs performance and enhanced SSD performance.
The BOSS-N1 provides 2x HWRAID M.2 NVMe SSDs that are Hot-swappable with Single drive RAID 0 and dual drive RAID 1 support.
| Supported storage controller cards |
| Internal Controllers |
- PERC H965i Premium Performance
- PERC H755 Value Performance
- PERC H755N Value Performance
- PERC H355 Value
|
| External Controllers |
|
| Internal Boot |
- Boot Optimized Storage Subsystem (BOSS N1):
HWRAID 2 x M.2 NVMe SSDs
- USB
|
| Software RAID |
|
| SAS Host Bus Adapters (HBA) |
|
Power, Dimensions, & Weight
Power
Two hot swap with full redundant AC or DC power supply units.
- 1800W Titanium 200—240 VAC or 240 HVDC
- 1400W Platinum 100—240 VAC or 240 HVDC
- 1100W Titanium 100—240 VAC or 240 HVDC
- 1100W LVDC -48 — -60 VDC
- 800W Platinum 100—240 VAC or 240 HVDC
- 700 W Titanium 200—240 VAC or 240 HVDC
Dimensions
Width 482 mm (18.97")
Height 42.8 mm (1.68")
Length 822.88 mm (32.39") w/ bezel
-----------809.04 mm (31.85") w/o bezel
Weight
w/ drives 22.51 kg (49.62 lbs)
w/o drives 18.5 kg (40.78 lbs)
