Leave a Message
Send us a message and we will get back to you within our regular business hours Monday - Friday 8AM - 6PM PST
Your Cart is Empty
The HPE ProLiant ML350e Gen8 is a dual processor tower platform, which is built on the latest Intel Xeon E5-2400 processors to create unique system architecture. The HPE ProLiant ML350e Gen8 delivers the industry's most powerful embedded management technology with HPE integrated Lights-Out 4 (iLO4), which allows businesses to manage the servers anytime and from anywhere.
ML350e Gen8 rack view
Powered by Intel Xeon E5-2407 quad-core, quad-thread processor and 4GB DDR3 memory, the HP ProLiant ML350e Gen8 tower server system delivers substantial computing power to address demanding applications.
Flexible design provides low-cost expansion capabilities as your business grows giving you the flexibility of adding a second processor, additional hard drive space, more memory, and more storage.
ML350e Gen8 front-back
Processor (one of the following depending on model)
Eight-core processors 1
Six-Core processors 2
Quad-Core processors 3
Cache memory (one of the following depending on model)
On system management chipset
HPE iLO (Firmware: HPE iLO4)9
Memory (one of the following depending on model)10
HPE Ethernet 1Gb 2-port 361i Adapter
Internal storage devices 11
Optical drives (One of the following depending on model)
HPE Half-Height SATA DVD-ROM Optical Drive
None ship standard
Hard drive bays (One of the following depending on model)
Up to 24 SFF hard drive bays or 18 LFF hard drive bays
Maximum internal storage (one of the following depending on model)
System fans 13
Two (2) Non-hot plug, non-redundant fans ship standard (support up to 4 fans).
Integrated Matrox G200 video standard
HPE iLO 4 On System Management Memory
Industry standard compliance
NOTE: 1. All support up to 1600 MHz DDR3 memory speeds.
2. All support up to 1333 MHz DDR3 memory speeds.
3. All support up to 1066 MHz DDR3 memory speeds.
4. For Eight-core processors.
5. For Six-core processors.
6. For Quad-core processors.
Disclaimer: One or more of the links above will take you outside the Hewlett-Packard Enterprise web site, HPE does not control and is not responsible for information outside of the HPE web site.
8. Total 8, 12 or 16 cores.
10. Click here for Memory Population table or the Online Memory Configuration tool
11. All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using either P/N 666987-B21: HPE SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HPE LFF Gen8 Hard Drive Blank Kit. These part numbers for single HDD blanks below are also provided should the customer require replacement HDD blanks for their server.
12. The SD slot is not a hot-pluggable device. User should not attempt to plug an SD card into the SD slot while the server is powered.
13.Redundant Enablement Kit (part # 664046-B21) is required when redundant fans are needed.
Operating systems and virtualization software support for ProLiant Servers
HPE Insight Management software
For more information on Operating systems and virtualization software support for ProLiant Servers, click here to visit the Operating System product site .
Dimensions (H x W x D) (with feet/bezel)
46.2 x 21.8 x 74.0 cm (18.19 x 8.58 x 29.13 in)
Input requirements (per power supply)
Rated line voltage
100 to 240 V ac
Rated input current
7.1 A (at 120 V ac) to 3.5 A (at 240 V ac)
Rated input frequency
50 to 60 Hz
Rated input power
Power supply output (per power supply)
Rated steady-state power
Maximum peak power
BTU rating (maximum)
System inlet temperature
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per 304.8 m (1.8°F per 1000 ft) above sea level to a maximum of 3048 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr)
Relative humidity (non-condensing)
10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
3048 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min)
9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min)
Acoustic noise 1
Emissions classification 2 (EMC)
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1
NOTE: 1. Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C (73.4ºF) ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Configurations tested for entry models included Windows 2008 Enterprise 64-bit.
Configurations tested for base models included one (1) 1TB non-hot plug LFF SATA HDD and Windows 2008 Enterprise 64-bit.
The listed sound levels apply to standard shipping configurations. Additional options may result in increased sound levels.
2. Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.