Multi-Quantity Discounts Available for ALL Line Items
** LARGE DISCOUNTS available for complete systems. Pricing displayed is for single item purchases **
Use the configuration tool to create your solution and submit it us for a quote OR send us a message with your complete build requirements to receive best pricing
READ ME
- Some options may not be displayed until the compatible parent option is chosen ie. Chassis – Drives, Processor – RAM etc.
- “Submit for Quote” items can be added to your cart and sent to us via the cart page
- Click the blue bar to close/open a section from view after choosing your options
Intel Xeon E5-2600v3
Supports up to (2) processors
Each CPU comes with 2 Fans and 1 Heatsink
Intel Xeon E5-2600v4
Supports up to (2) processors
Each CPU comes with 2 Fans and 1 Heatsink
Bezel (Optional)
HP Quick-release Latch Rack Ears option kit is required for Security Bezel. This option also provides one front USB 3.0 upgrade.
Thumbscrew ears are available on SFF models only.
Blanks (Optional)
Please install blanks for optimal airflow.
Cable Kit (Optional)
One of the above cables is required to be selected depending on the combination of chassis and storage controller.
Memory E5-v3 (Optional)
Supports 8 DIMMs per CPU
Memory E5-v4 (Optional)
Supports 8 DIMMs per CPU
Drive Options (Optional)
Below are chassis drive upgrades.
Non-Hot-Plug Chassis can go from a 4LFF to 8LFF NHP with the (774869-B21)
The 8LFF Chassis can go from 8LFF to 12LFF with the (725574-B21)
The 8SFF Chassis can upgrade to the 16SFF with the (725572-B21)
The 12LFF Chassis does not have a Drive upgrade.
HPE Non-Hot-Plug LFF Drives SATA (3.5in) (Optional)
Supports up to (4) or (8) Drives depending on the backplane installed.
HPE Hot-Plug LFF Drives SAS (3.5in) (Optional)
Supports up to (4), (8) or (12) Drives depending on the backplane installed.
HPE Hot-Plug LFF Drives SATA (3.5in) (Optional)
Supports up to (4), (8) or (12) Drives depending on the backplane installed.
HPE Hot-Plug SFF Drives SAS (2.5in) (Optional)
Supports up to (8) or (16) Drives depending on the backplane installed.
HPE Hot-Plug SFF Drives SATA (2.5in) (Optional)
Supports up to (8) or (16) Drives depending on the backplane installed.
PCI Riser Options (Optional)
Max 6 PCI-e Slots on two Risers
Please read the \"Know your Server\" section in the product description for more details.
M.2 (Optional)
M.2 drives go in PCIe slot and use B140i SATA controller only.
Cooling (Optional)
Each CPU comes with 2 fans and a heat sink.
Networking Adapters (Optional)
Network Controllers, FlexibleLOM Adapters, InfiniBand Adapters, Converged Network Adapter
The FlexibleLOM need the HP DL180 Gen9 FlexibleLOM Enablement Kit 780965-B21
All of these cards need to be installed in a PCIe Riser. Please read the \"Know your Server \" section for help.
Host Bus Adapters (HBAs) (Optional)
Storage Controller (Optional)
NOTE: B140i provides support for up to 8 SATA drives and data transmission speeds up to 6Gb/s and supports RAID 0, 1 & 5.
NOTE: H240 Provides support for up to 8 SAS/SATA drives, data transmission speeds up to 12Gb/s and supports RAID 0, 1 & 5.
NOTE: P840 Provides support for up to 16 SAS/SATA drives, data transmission speeds up to 12Gb/s.
Any performance smart arry need to the HP 96W Smart Storage Battery with 145mm Cable for DL/ML/SL Servers 727258-B21 installed as well for FBWC
GPU / Workload Accelerators (Optional)
HP DL180 Gen9 Graphic Card Adapter Kit 725576-B21 is the GPU power Cable
All of these cards need to be installed in a PCIe Riser. Please read the \"Know your Server \" section for help.
Optical Drives (Optional)
Optical drive is not supported on LFF models.
The Optical Drive bay is not available with +8SFF drive bay optional upgrade.
Must add the enablement kit to support an optical drive.
USB Option is at the bottom and is external.
HPE USB and SD Options (Optional)
8LFF & 12LFF drive cage models with Quick release latch rack ears supports front USB 3.0.
iLo (Optional)
iLO Management (standard), Intelligent Provisioning (standard)
Access iLo from the front port with this HP DL180 Gen9 Dedicated iLO Management Port Kit 725581-B21
HP AHCI-Enable FIO Setting 801845-B21 needs to be selected when Advanced Host Controller Interface mode is required with B140i controller.
Rail Kit (Optional)
This applies to both LFF and SFF models and it does not include cable management arm.
Trust Platform Module (TPM) (Optional)
HPE Trusted Platform Module 2.0 Option works with Gen9 servers with UEFI Mode not Legacy Mode.
Power Supply Unit (PSU)
If you choose the 900W PSU you MUST also choose the RPS Backplane.
If you want 2x900W PSU Redundancy. There is a kit at the bottom that comes with the backplane as well.
Helpful Tip: Once desired configuration is selected click "Add to Cart". From the cart page you can submit a submit a quote request for best pricing
Refurbished HPE DL180 Gen9 Configure to Order Rack Server
Designed with just the right balance of scalability and performance, the refurbished HP ProLiant DL180 Gen9 Server is an optimized 2U model that helps growing businesses, data centers, and service providers alike manage their infrastructures more efficiently. With high availability and efficiency for dense storage applications, this server allows for more agile management that enables accelerated service delivery.
What's New for DL180 Gen9
- Intel Xeon E5-2600v4 processor support (Up to 120 W)
- New 900 W/240 V power supply
- HPE Trusted Platform Module (TPM) 2.0
- New HDD offerings
- Support for ClearOS – an easy to use OS with an application marketplace
Scalability and Performance To Meet the New Standard of Growing Data Center Needs
The HPE ProLiant DL180 Gen9 Server provides ample storage capacity on demand with drive configurations ranging from (4) to (12) Large Form Factor (LFF) or (8) to (16) Small Form Factor (SFF) HPE SmartDrives, with flexibility of LFF non-hot plug (NHP) options at the right economics.
It supports up to two Intel Xeo processor E5-2600 v3/v4 processors with up to (12) cores and (16) DIMM slots of HPE DDR4 SmartMemory offering improved performance and efficiency.
Comes standard with 2x1GbE and choice of HPE FlexibleLOM or PCIe standup 1GbE or 10GbE Adapters provide you flexibility of networking bandwidth and fabric so you can adapt and grow to changing business needs.
Up to six PCIe 3.0 riser slots to support a wide range of GPUs and networking cards offering increased IO bandwidth and seamless expandability.
Embedded SATA HPE Dynamic Smart Array B140i Controller for boot and data. Choice of HPE Smart Array Controllers with increased performance, data availability with 12 Gb/s SAS technology or HPE Smart HBAs with reliable high performance SAS connectivity capable of running HBA mode or simple RAID mode.
Know your Server - CTO Configuration Support
Need help with the configuration? Contact us today!
Base Knowledge
The HPE DL180 Rack Server has support for 2 Intel Xeon E5-2600v3 or v4 Processors. When installing a Second GPU or accessing all the PCI slots, you will need the second processor and most likely the redundant power supply. The DL180 Rack Server holds up to 8 DIMMs per CPU with a total of 16 DIMMs. The system supports both LRDIMM and RDIMM, below is the max for each. Mixing of memory types is not supported.
- Maximum Capacity 1TB (16 x 64GB LRDIMM @2400MHz)
- Maximum Capacity 512GB (16 x 32GB RDIMM @2400MHz)
The DL180 comes with the B140i controller. Which provides support for up to 8 SATA drives and has data transmission speeds up to 6Gb/s while also supporting RAID 0, 1 & 5. If you would like to upgrade to SAS storage you will need the H240 (726907-B21) or the P440 (726821-B21). Both provide support for up to 8 SAS/SATA drives, data transmission speeds up to 12Gb/s, and supports RAID 0, 1 & 5. If 8 SAS drives are not enough, you can install the P840 Smart Array (726897-B21). This P840 provides support for up to 16 SAS/SATA drives, data transmission speeds up to 12Gb/s. If you install a Performance Smart Array you will also need the HP 96W Smart Storage Battery with 145mm Cable for DL/ML/SL Servers (727258-B21). Please view the cable section for the correct cables.
Maximum Internal Storage
- Hot Plug SFF SAS 32TB 16x2TB
- Hot Plug SFF SATA 32TB 16x2TB
- Hot Plug LFF SAS 120TB 12x10TB
- Hot Plug LFF SATA 120TB 12x10TB
- Hot Plug SFF SAS SSD 4TB 16x3.84TB
- Hot Plug SFF SATA SSD 4TB 16x3.84TB
- Hot Plug LFF SATA SSD 08TB 12x3.84TB
- Non-Hot Plug LFF SATA 32TB 8x4TB
Before we move on, we need to talk about the chassis drive upgrade kits. You can go from 4 Non-Hot-Plug to 8 Non-Hot-Plug by adding the HPE DL180 Gen9 8LFF Non-hot Plug FIO Cable Kit (774869-B21). If you selected the 8LFF Hot Plug Chassis, you could upgrade to make it a 12 LFF Chassis with the HP DL180 Gen9 12LFF Hot Plug Enablement Kit (725574-B21). If this upgrade is made you will also have to remove the I/O assembly from the front and install the Quick-release Rack ears. Finally, if you selected the 8SFF Chassis, you could upgrade it to a total of 16 SFF Drives with the HP DL180 Gen9 8SFF Hard Drive Cage/Backplane Kit (725572-B21). These drive kits with the controllers above will provide you with all the flexibility needed to grow your system.
M.2
M.2 drives go in a PCIe slot and use the B140i SATA controller only. You have the choice of either a single or dual 340GB M.2 PCIe Kit or you can install the riser card alone and select your M.2 Drives to be installed. Remember this will take up a PCIe slot.
PCI Risers
With a total of 6 PCI-e Slots on a max of two riser cards on the DL180 HPE Rack Server. You must be selective about how you use them. If you are trying to expand the network capabilities with FlexibleLOM or any other type of network card. Please double-check the slot length needed when choosing the riser. If you would like to install 2 GPU’s you will need to upgrade the CPU and install the redundant fan kit. Below is a table of the risers and their slot length and height. Please refer to this when choosing a riser for your adapters.
| Name |
Expansion Slot # |
Technology |
Bus Width |
Connector Width
|
Form Factor |
| Primary 3 Slot x8 PCI-E Riser Kit (725569-B21) |
1 |
PCIe 3.0 |
x8 |
x8 |
Full-height, full-length slot |
| 2 |
PCIe 3.0 |
x8 |
x8 |
Full-height, half-length slot |
| 3 |
PCIe 3.0 |
x8 |
x8 |
Full-height, half-length slot |
| Primary x16 PCI-E Riser Kit (725570-B21) |
1 |
PCIe 3.0 |
x16 |
x16 |
Full-height, full-length slot |
| 2 |
PCIe 3.0 |
x8 |
x8 |
Full-height, half-length slot |
| Riser with FlexibleLOM (Optional) |
1 |
PCIe 3.0 |
x8 |
x8 |
Full-height, full-length slot |
| 2 |
PCIe 3.0 |
x8 |
x8 |
Full-height, half-length slot |
| 3 |
FlexibleLOM |
|
|
Full-height, half-length slot |
Cooling
Each processor comes with 2 fans for optimal cooling, if you desire fan redundancy you can install the Dual redundant fans option kit (725571-B21). If you install 2 GPU’s you will need to install the fan redundancy and 2 CPUs.
|
Non-Redundant |
Redundant
|
| 1P Model |
2 fans |
4 fans |
| 2P Model |
4 fans |
5 fans |
GPU /Workload Accelerator
The HPE DL180 Gen9 Graphic Card Adapter Kit is a power cable for the GPU which is necessary for each GPU you install. Please only install the workload accelerators in this CTO. If you plan to install 2 GPUs, then you will need to install a second processor and the redundant fan option kit. Remember each CPU comes with 2 Fans so you will only need one of each.
Let’s talk power!
Power has not changed in the Gen9 DL Series. You have the standard non-hot-plug 500W PSU, but if you want more power or a redundant configuration you can install the 900W RPSU. If you install the 900W RPSU (775595-B21) then you will also need to install the RPSU Backplane (814835-B21) and a PSU Blank for airflow. If you desire 2x900W RPSU, there is a kit that comes with both batteries and the backplane (820792-B21).
Other Information
Like a few other DL Gen9 Series servers, if you want the 2U security bezel installed you must also install the HP Quick-release Latch Rack Ears Kit (725579-B21). The Quick Release Rack ears also provide the USB 3.0 port to the front of the server.
If you have the 12LFF configuration, there is no room for the front assembly and the Quick-release Latch ears are mandatory.
Only on the SFF models can the Thumbscrew Ear (782641-B21) be installed since the SFF Chassis has a front I/O Assembly that sits vertically next to the drives.
Lights Out! iLO
This Dl180 HPE Rack Server has the ability to access the iLO software by installing the HP DL180 Gen9Dedicated iLO Management Port Kit (725581-B21).
HPE Integrated Lights-Out (HPE iLO) - Monitor your servers for ongoing management, service alerting, reporting, and remote management with HPE iLO.
UEFI - Configure and boot your servers securely with industry-standard Unified Extensible
Firmware Interface (UEFI).
RESTful API - RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server management such as configuration and maintenance tasks based on modern industry standards.
Intelligent Provisioning – Hassle-free server and OS provisioning for 1 or few servers with Intelligent Provisioning.
EmbeddedRemote Support - The Hewlett Packard Enterpriseembedded remote support when used with Insight Online direct connect or HPE Insight Remote Support, allows HPE ProLiant servers to transmit hardware events directly to Hewlett Packard Enterprise or a Hewlett Packard Enterprise Authorized Partner for automated phone home support.
