Sun Netra 440 Server | Sun Netra Series | Sun Servers | Sun Microsystems Hardware

Specifications:

Capacity: Up to four 1.28/1.6-GHz UltraSPARC IIIi processors
Up to 32 GB registered DDR SDRAM (PC2100) 128-bit plus ECC databus memory
Six internal, 64-bit, full-length, PCI 2.2-compliant expansion slots
Two 10/100/1000Base-T Ethernet ports
Up to four hot-swappable, 146-GB, 15K-rpm Ultra320 SCSI drives

Main Memory: Up to 32 GB registered DDR SDRAM (PC2100) 128-bit plus ECC databus memory 16 DIMM slots, with 4 DIMM slots per processor

Network: Two 10/100/1000Base-T Ethernet ports
Network Management: One 10Base-T Ethernet port
Serial management: One TIA/EIA-232-F (RJ45) port
Serial: One TIA/EIA-232-F asynchronous (DB9) port
SCSI: One Ultra320 SCSI multimode (SE/LVD) port
USB: Four OHCI 1.0-compliant interfaces, each supporting dual speeds of 12 Mbps and 1.5 Mbps
Expansion bus: Six 64-bit, full-length, PCI 2.2-compliant expansion slots:
Three 33-MHz or 66-MHz 3.3V slots
Three 33-MHz 5V slots
System Configuration reader and card: Front accessible to transfer system configuration information, including host ID, MAC address, and NVRAM
Alarms: Four fail-safe, dry contact alarms (critical, major, minor, and user-defined)

Internal disk: Up to four hot-swappable, 146-GB, 15K-rpm Ultra320 SCSI disks. Standard configurations come with 73 GB HDD.
Removable media: Optional DVD RW or DVD-ROM
External disk: Support provided for the following storage arrays:
Sun StorEdge 3000 series
Sun StorEdge A1000/D1000
Sun StorEdge D240
Sun StorEdge T3 enterprise array
Sun StorEdge T3 workgroup array
Sun StorEdge D2
Sun StorEdge S1
Sun StorEdge A5200
Sun StorEdge 6000 series
Sun StorEdge 3900 series
Sun StorEdge 6900 series
Sun StorEdge 9900 series
External tape: Support provided for the following tape drives and tape automation:
Sun StorEdge 4mm DDS-3 Unipack
Sun StorEdge 4mm DDS-4 Unipack
Sun StorEdge SDLT 320 Desktop Tape Drive
Sun StorEdge LTO 2 Desktop Tape Drive
Sun StorEdge L8 Tape Autoloader
Sun StorEdge L9 Tape Autoloader
Sun StorEdge L25-LVD versions
Sun StorEdge L100-LVD versions
Sun StorEdge L180
Sun StorEdge L7
Sun StorEdge DAT 72 Tape

Power supplies: Four 400 W hot-pluggable AC or DC power supplies with separate power cords; a minimum of two supplies are required for normal system operation.
DC power: -40V to -75V DC (range)
-48V DC or -60 V DC (nominal)
AC power: 90-264V AC (47-63Hz)
Operating temperature: 5° C to 40° C (41° F to 104° F) 5% to 85% relative humidity, noncondensing short term
-5° C to 55° C (23° F to 131° F) 5% to 90% relative humidity, noncondensing, but not to exceed 0.024 kg water/kg dry air (0.053 lb water/2.205 lb dry air)
Nonoperating temperature: -40° C to 70° C (-40° F to 158° F), up to 93% relative humidity noncondensing, 38° C (100.4° F) max wet bulb
Altitude: Operating: up to 3000 m
Nonoperating: up to 12,000 m
Acoustic Noise: Declared noise emissions in accordance with ISO 9296: 7.0 B (operating and idling)
ETSI: EN 300 019-2-1, Table 3.1 and Table 3.1E, except for:
-5º C Cold start
Condensing humidity
Rain
Seismic: Meets GR-63-CORE requirements for earthquake risk Zone 4

Product Categories: Telecommunications Network Equipment Information Technology Equipment
Safety: CULUS, TUV GS, CB scheme with all national differences CE, CCC, GOST R, S-MARK
EMC: Class A FCC, CE, VCCI, BSMI, C-Tick, MIC, CCC, GOST
Telecom Environment Certification: Telecordia SR 3580 NEBS Level 3

Height: 222 mm (8.75 in.)
Width: 440 mm (17.32 in.) including bezel
Depth: 495 mm (19.5 in.) overall maximum depth
476 mm (18.75 in.) front bezel tangent to rear I/O panel
Weight: 37 kg (81.6 lb) fully configured with PCI cards and rack kit
36 kg (79.4 lb) without PCI cards and rack kit
Enclosure: Fits into a standard 19-in.-wide rack. 19-in., 2-post and 4-post rack kit is included. Additional rack kits available include 23-in., 2-post, 600 mm x 600 mm and 19-in., 4-post, slide adjustable up to 863.6 mm.

Used Sun Netra 440 Server