Sun Fire X2200 M2 Server :: Sun Fire Series :: Sun Servers :: Sun Microsystems Hardware

Specifications:

Processor: One or two Next-Generation AMD Opteron - 2000 Series dual core processors:
2222 (3.0 GHz, 95W)
2220 (2.8 GHz, 95W)
2210 (1.8 GHz, 95W)
2218 (2.6 GHz, 95W)
High Efficiency 2218 HE (2.6 GHz, 68W)
Cache: 1 MB Level 2 per core
System Architecture/CPU Interconnect: X16 HyperTransport 8 GB/s (Processor to South Bridge) X16 HyperTransport 8 GB/s (CPU-0 to CPU-1)
Graphics Controller: ASPEED AST2000

DIMM Slots, Memory Type: 8 DIMM slots per processor
16 DIMM slots total system Registered DDR2/667 ECC DIMMs (128 bit plus ECC databus)
Supported Max Memory Configuration: Up to 64 GB memory supported. System configurations from 1 GB up to 64 GB. For optimal performance, install DIMMS in pairs.

Network: Four Integrated 10/100/1000Base-T Ethernet ports
Management: Service processor with embedded Lights Out Management (LOM) standard
Serial: One Serial DB-9 Port (on rear)
SATA: Two channel SATA II interface, internal access only
USB: Six USB 2.0 ports - two front, four rear
Expansion bus: Standard: Riser card assembly with two internal 64-bit, 8-lane, low-profile, half length PCI-Express slots
Optional: Riser card assembly with one internal 64-bit, 16-lane, low-profile, half length PCI-Express slot
1x 16 PCI-E riser supports Nvidia QuadroPlex Visual Computing System

Internal disk: Up to two hot-pluggable 3.5" SATA II or SAS disk drives; 250 GB, 500 GB 7200 rpm SATA II or 146 GB 15K rpm SAS supported.
Removable Media: Up to one EIDE DVD-ROM or DVD+/-RW DL drive.
RAID: RAID 0/1/0+1 with optional 4-port SAS HBA; all supported OS with pair of SATA II or SAS drives

Mounting Options: 19-inch rackmount kit
Express 19-inch rackmount kit (tooless)

Product Documentation: Latest Documents
Where to Find Sun Fire X2200 Server Documentation
Sun Fire X2200 M2 Server Product Notes
Sun Fire X2200 M2 Server Operating System Installation Guide
Embedded Lights Out Manager Administration Guide
Sun Fire X2200 M2 Server Installation Guide
Sun Fire X2200 M2 Server Service Manual
Sun Fire X2200 M2 Server Safety and Compliance Guide

Operating temperature /humidity (single, non-rack system): 2 °C to 38 °C (36° F to 100° F), 7% to 93% relative humidity, non-condensing, 27° C max wet bulb
Non-operating temperature/humidity (single, non-rack system): -40° C to 68° C (-40° F to 154° F), up to 93% relative humidity, non-condensing, 38° C max wet bulb
Altitude (operating) (single, non-rack system): Up to 3,000m/9000ft, maximum ambient temperature is derated by 1° C per 300m above 900m
Altitude (non-operating) (single, non-rack system): Up to 12,000 m

Acoustic Noise Emissions: Declared noise emissions in accordance with ISO 9296, A-weighted, operating and idling
LwAd (1B = 10dB): Idle, at or below 25° C: 6.9B Max, at ambient: 7.2B
LpAm bystander: Idle, at or below 25C: 54.9 dBA Max, at ambient: 58.1 dBA

Meets or exceeds the following requirements:
Safety: IEC 60950, UL/CSA60950, EN60950, CB scheme with all country differences
RFI/EMI: FCC Class A, Part 15 47 CFR, EN55022, CISPR 22, EN300-386:v1.31, ICES-003
Immunity: EN55024, EN300-386:v1.3.2
Safety: CE Mark, GOST, GS Mark, cULus Mark, CB scheme, CCC, S Mark
EMC: CE Mark, Emissions and Immunity Class A Emissions Levels: FCC, C-Tick, MIC, CCC, GOST, BSMI, ESTI, DOC, S Mark
Other: Labeled per WEEE (Waste Electrical and Electronic Equipment) Directive, Reduction of Hazardous Substances Compliant (2002/95/EC)

Used Sun Fire X2200 M2 Server