NetApp FAS6030 Filer | FAS6000 Series Filers | NetApp Filers | NetApp Hardware

Specifications:

Operating System: Network Appliance Data ONTAP 7.2.0 software
Network Protocol Support: NFS V2/V3/V4 over UDP or TCP, PCNFSD V1/V2 for (PC) NFS client authentication, Microsoft CIFS, HTTP 1.0, HTTP 1.1 virtual hosts
SAN Protocol Support: Fibre Channel Protocol (FCP) for SCSI; fabric-attached and direct-attached; iSCSI
Standard Hardware Features: ROHS-compliant, full-duplex 10/100/1000Base-T Ethernet onboard console, diagnostic LED/LCD, Remote Management Card standard, redundant hot-plug cooling fans, redundant hot-plug power supplies, Compact Flash, 19" rack-mount enclosure, optional 220 V 42U 19" system cabinet
Default/Min./Max. RAID Group Sizes: RAID4 (single parity) and RAID-DP (double parity) RAID4 support on FC disks are: Default 7 data + 1 parity/Min. 1 data + 1 parity/Max. 13 data + 1 parity; RAID4 support on SATA disks are: Default and Max. 7 data + 1 parity/Min. 1 data + 1 parity; RAID-DP support on FC disks are: Default 14 data + 2 parity/Min. 1 data + 2 parity/Max. 26 data + 2 parity; RAID-DP support SATA disks are: Default 12 data + 2 parity/Min. 1 data + 2 parity/Max. 14 data + 2 parity
Disk Shelves Supported (Fibre Channel, SATA): DS14, DS14mk2 FC, DS14mk2AT
Disk Drive Capacities Supported: FC—9(1)/18(1)/36(1)/72/144/300GB, SATA—250GB, 500GB

Max. Raw Capacity(2), (3): 420TB
Max. Number of Disk Drives: 840(4)
Max. Number of FC Loops (dual attach): 10
Max. Drives per FC Loop: 84
Max. Volume/Aggregate Size(3): 16TB
ECC Memory: 16GB
Nonvolatile Memory: 512MB
Onboard GbE Ports: 6
Onboard 2Gb Fibre Channel Ports (configurable as Storage-attached initiator or Host-attached target): 8
(2) Max. capacity is derived based on the type, size, and number of the drives. (3) Max. capacity and volume size are calculated using Base10 arithmetic (i.e., 1TB = 1,000,000,000,000 bytes). (4) Max single controller loops/drives available in Q3CY06.

PCI Express Expansion Slots: 5
PCI-X Expansion Slots: 3
Optional Network Connectivity (max.): Quad GbE TOE (copper) cards: 2
Single 10GbE TOE (fiber) cards: 2
Dual GbE (copper or fiber) cards: 5
Dual iSCSI (copper or fiber) host adapter: 3
Dual FC Disk Adapters (max.): 4
Dual 4GB FC Target Adapters (max.): 4
Dual FC, Single FC, LVD SCSI -Tape Adapters (max.): 3

AC Power/Current (line voltage for standalone systems dependent on local power distribution; system cabinets are 200 to 240 V only): 100 to 240VAC, 11 to 5A (typical)
12A (max.) @ 100VAC
200 to 240VAC, 5.5A to 2.8A (typical)
6A (max.) @ 200VAC
Thermal Rating: 3071 BTU/hr.
Weight: 121 lb (54.8 kg)
Height: 10.3" (26.2 cm), fits into 6U space
Width: 19" IEC rack-compliant (17.53", 44.53 cm)
Depth: 23.5" (59.7 cm), 29.05" (73.8 cm) with cable management bracket
Operating Temperature, Altitude, and Relative Humidity: 10 C to 40 C (50 F to 104 F); at </= 3,000 m (at </= 10,000') elevation; 20% to 80% relative humidity, noncondensing (28 C wet bulb temperature)
Non-operating Temperature and Relative Humidity: -40 C to 65 C (-40 F to 149 F); 10% to 95% relative humidity, noncondensing, in original container
Operating Acoustic Noise: 56.5 dBA sound pressure (LpA) @ normal operating conditions (at 22C and at sea level)
Min. Cabinet Clearances: 1.85" (4.7 cm) for bezel, 3" (7.6 cm) for cable radius
Min. Service Clearances: 25" (63.5 cm) from front of cabinet; 40" (76 cm) from rear of cabinet

Disk Drive Storage Shelf: DiskShelf14 familyDS14, DS14mk2 FC, and DS14mk2AT; each w/14 low-profile slots for FC and SATA disk drives
Disk Drive Storage Shelf Interface: PCI-based Fibre Channel-Arbitrated Loop (FC-AL)
DiskShelf14 Interface: Dual, redundant electronically switched hub (ESH2) modules or dual, redundant ATA modules
Power Supply/Cooling Fans: Dual, redundant, hot-pluggable, integrated power supply/fan assemblies (220V/110V)
AC Power/Max. Current: 100 to 120VAC/3.95A; 200 to 240VAC/1.9A
Thermal Rating: 1,215 Btu/hr (fully loaded shelf)
Operating Acoustic Noise: 49 dBA sound pressure (LpA) @ normal operating conditions (at 22C and at sea level)
Dimensions (height/width/depth): 3 EIA U (5.25", 13.3 cm)/19" IEC rack-compliant (17.6", 44.7 cm)/20" (50.85 cm)
Weight: 77 lb (35 kg) fully loaded

Brocade: Silkworm 2400/2800 (TapeSAN only)
Brocade: Silkworm 200/3250/3800/3850/3900/4100/12000/24000/200E
McData: ES 3016/3032, Intrepid 6064/6140/ED-5000, Sphereon 3216/3232/4300/4400/4500/4700
Cisco: MDS 9120/9140/9216/9506/9509/9513

Includes 2 Sets of Dual 16A, Zero U Power Distribution Units (PDUs) or 1 Set of 24A Zero U PDUs: Accommodates 1 filer head and 12 disk shelves or 2 filer heads and 10 disk shelves or 14 disk shelves
1 filer head and 11 disk shelves or 2 filer heads and 8 disk shelves or 14 disk shelves
AC Power: 200 to 240VAC
Current: 32A total 2 redundant sets of dual 16A cables with NEMA L6-20 or IEC 309 connectors or Australia AS/NZ53123-20; 24A total 2 redundant cables with NEMA L6-30 or IEC 309 connectors
Dimensions (height/width/depth): 78.75" (200 cm)/23.6" (60 cm)/37.4" (95 cm)
Min. Clearances: 48" (122 cm) front and rear
Shipping Height: 90.6" (230 cm)
Weight (empty): 275 lb (125 kg)

Safety/Emissions/Immunity: Safety: EN 60950, CE, CSA 60950, UL 60950, CB IEC60950-1 (all national deviations), EN60825-1, IRAM, GOST-R, BSMI
Emissions/Immunity: FCC Part 15 Class A, ICES-03, CE, MIC, VCCI, AS/NZS CISPR 22, EN55022, EN55024, EN61000-3-2, EN61000-3-3, CoC (South Africa), BSMI

Used NetApp FAS6030 Filer