IBM pSeries p615-6E3 Server :: IBM pSeries Servers :: IBM Hardware

Features:

POWER4+ microprocessors with L3 cache: *Provide improved system and application performance and higher reliability for commercial applications in a smaller, more efficient package
Copper and SOI technology: *Improves processor performance and reliability while using less power and producing less heat to help conserve energy and help lower operational costs
Up to 16GB memory: * Allows exploitation of 64-bit addressing for database applications
*Provides growth options for greater throughput
ECC Chipkill™ bit-steering memory: *Helps significantly lower number of memory failures that cause system outages, thus increasing system availability
*Automatically activates memory spares when multiple memory errors are encountered
Front-mounted serial port: *Offers convenient connection of handheld devices for easy systems management
Wireless systems management: *Allows remote personnel to perform system maintenance and monitor performance
*Enables server farms to be managed more easily
Six hot-plug PCI-X adapter slots: *Provide growth options for increased capacity
*Support many commonly used adapters for increased availability at a lower cost
*Allow adapters to be added or removed without interrupting the system
Hot-swappable disk bays: *Provide greater system availability and smooth growth by allowing swapping or adding of disk drives without powering down the system
RAID support for internal disks: *Provides the ability to transparently survive an internal disk failure thereby improving data availability
*Increases disk I/O performance in selected configurations
Built-in service processor: *Continuously monitors system operations and takes preventive or corrective action for quick problem resolution and high system availability
*Allows diagnostics and maintenance to be performed remotely
Redundant hot-plug power and cooling subsystems: *Enhance system availability since cooling fans and power supplies can be changed without interrupting operations
*Provide backup power and cooling if primary unit fails
Dynamic processor and PCI bus slot deallocation: *Automatically deallocates resources when impending failure is detected, so applications can continue to run uninterrupted
IBM eServer Cluster 1600: *Provides centralized management of multiple interconnected systems
*Provides ability to handle unexpected workload peaks by sharing resources
*Allows for more granular growth so user demands can be readily satisfied

Specifications:

Microprocessor: 1-way or 2-way 1.20GHz POWER4+; 2-way 1.45GHz POWER4+
Level 3 (L3) cache: 8MB (ECC)
RAM (memory): 1GB (ECC, Chipkill)
Internal disk drive: One 36.4GB Ultra320 SCSI
Internal disk bays: Four hot-swappable (36.4GB, 73.4GB and 146.8GB disk drives available; up to 587.2GB)
Media bays: Three
Expansion slots: Six hot-plug PCI-X (64-bit) 3.3v (speeds up to 133MHz)
Bus width: 32- and 64-bit

I/O adapters: Integrated 10/100 and 10/100/1000 Mbps Ethernet controllers
Two integrated Ultra320 SCSI controllers
Ports: One parallel and three serial ports
Two ports for connecting the Hardware Management Console for pSeries

RAM: Up to 16GB (ECC, Chipkill)
Disk bays: Four additional hot-swappable disk bays (36.4GB, 73.4GB and 146.8GB disk drives available; up to 587.2GB additional)

Cluster management: Cluster Systems Management (CSM) v1.3 with AIX 5L v5.2
Cluster interconnect: Ethernet (CSM v1.3 with AIX 5L v5.1/5.2 or Linux)

Copper, SOI microprocessors Chipkill ECC, bit-steering memory ECC L2 cache, L3 cache Service processor Hot-swappable disk bays Hot-plug PCI-X slots, power supplies and cooling fans Dynamic Processor Deallocation (2-way) Dynamic deallocation of PCI bus slots Redundant hot-plug cooling fans and optional power supplies

100 to 127 or 200 to 240 V ac (auto-ranging)

7.0"H x 17.2"W x 20.0"D (178mm x 437mm x 508mm)—standard 4U rack-mount
21.0"H x 7.9"W x 23.0"D (533mm x 201mm x 584mm)—deskside
Weight: 94.8 lb (43.1 kg)

Used IBM pSeries p615-6E3 Server