Cisco UBR7246VXR Router | UBR7200 Series | Cisco Routers | Cisco Hardware

Specifications:

Midplane: Two PCI buses with an aggregate bandwidth of 3.2 Gbps
Dimensions (H x W x D): 10.5 x 17.00 x 21.25 in. (26.67 x 43.18 x 53.98 cm)
Weight: Chassis fully configured with a network processing engine, I/O controller, 2 port adapters, 4 cable line cards, a clock card, 2 power supplies, and a fan tray: ~ 100 lb (45.4 kg)
Heat dissipation: 800W (2730 Btu)
AC input power: 800W maximum (with either a single or dual power supply configuration)
Maximum AC input voltage: 100 to 240 VAC4 wide input with power factor correction
AC input current rating: 7A4 maximum at 110 VAC and 3.5A maximum at 240 VAC with the chassis fully configured
AC input cable: 18 AWG5 three-wire cable, with a three-lead IEC-320 receptacle on the power supply end, and a country-dependent plug on the power source end
DC input voltage rating: -48 VDC6 nominal in North America
-60 VDC nominal in the European Community
DC input current rating: Not to exceed 13A maximum at -48 VDC (370W/-48 VDC = 7.7A typical draw)
Not to exceed 8A maximum at -60 VDC (370W/-60 VDC = 6.2A typical draw)
DC input cable: 14 AWG (2.08 mm) recommended minimum, with at least three conductors rated for at least 140°F (60°C)
DC output power: 550W maximum (with either a single or dual power supply configuration)
DC voltages supplied: +3.5V, +5.2V, +12.2V, -12.2V, +16V, -16V
Operating frequency: 50/60 Hz
Airflow: ~120 cfm
Temperature: 32 to 104°F (0 to 70°C)
-4 to 149°F (-20 to 65°C)
Humidity: 10 to 90% noncondensing
Safety: UL 1950, CSA 22.2 No. 950, EN60950
EMI: FCC Class A, CSA Class A, EN60555-2, EN55022 Class B, VCCI Class 2, AS/NRZ 3548 Class A
Immunity: IEC-1000-4-2, IEC-1000-4-3, IEC-1000-4-4, IEC-1000-4-5, IEC-1000-4-6, IEC-1000-4-11, IEC 1000-3-2

Used Cisco UBR7246VXR Router